gauge

I made this for under $50 bucks which includes the cost of chrome secured it to the speedo with some 3m tape what do you think?

I'm thinking about getting an oil pressure gauge but have ran into some questions. I'm looking to match my digital speedo so I was looking at the digital oil pressure gauges. 1. Has anyone on here mounted one if so where did you mount the sending unit? Everything I found so far has a...

Anyone know where I might be able to get the lens for the tach and temp gauges? mine are crazed, maybe even cracked. I tried buffing them out and that helped, but after sitting in bright light for a while the cracks show up. I finally figured out why; the cracks are small but when left in the...

Im looking to change out my gauge lights and my headlight. Who has the best price on hid headlight kit and gauge bulbs. Im looking for plug and play set up.

I got a little fed up with trying to use calipers on the rounded surfaces of the float chamber and float itself so I snipped this little deal out from the plastic cap of a vitamin bottle. There are probly several ways to fab this thing but I started with a carb that was already adjusted and...

Went to local bike night tonight and saw 3 other gen1 vmaxes, and one of them had a small (about 1&1/2 inch diameter) A/F gauge mounted in his faux tank. It looked like an older gauge, and seemed to have lights that lit up the different sections, ie: very lean, lean, rich ,very rich. I did a...

Hi All, Does anyone know if an '06 gauge cluster will plug right in to a '93 Max?

I am going to be looking at an electrical issue that popped up a couple of weeks ago tonight and am hoping for some ideas as to what has happened. Symptoms: 1) No blinkers 2) Tach stopped working 3) Water temp gauge stopped working 4) Neutral light stopped working Those are the only...

Hey all, I bought one of COO's oil pressure gauges and finally got around to mounting it this morning. When I got the old plug out and went to install the gauge's plug, I realized that I had not received the new crush washer with it.:confused2: Thanks to the forum, though, I was able to...

Sometimes I'm reading posts and someone will refer a mark on their temp gauge saying things like "by the time the needle points at the first mark" or "somewhere between the second and first". my 2004's doesn't have these marks. Could someone post a pic of a temp gauge that has those marks so...

ok so i havent had time with my new bike to really dig into it. i have a wire diagram but untill i can repair or replace the temp gauge how can i be sure my max is cool so i dont damage it. this is my first water cooled bike. on my car i could at least open up the radiator cap and see that water...

Looking at adding a new tach and or speedo any ideas on brackets for the gauges

Any tricks for taking the clear plastic lenses out ? Are they glued or pressed in ? :ummm:

Where's the best ( only ? ) place to hook up the gauge ?

I've never been a big fan of the "dummy" gauges that don't have any numbers on them. For whatever reason, they kind of annoy me. If you're going to bother with an actual gauge instead of an ***** light, might as well do it right and calibrate it rather than just slapping a "hot" and "cold" line...

Anyone here know who the guy on ebay is making the tach/temp stainless covers?

I saw in one of the carb threads that someone installed a AFR gauge on their Vmax. How would one do this? Do you drill and weld the bung inline with your exhaust? I'd love to have a AFR gauge on my Vmax when troubleshooting carb issues. I've tuned car carbs a lot on cars...for some reason I...

The temp gauge on my bike doesnt work.I have changed the sending unit with a known good one and have also changed the gauge itself and I also made sure it had a good ground.What else could there be?Thanks ________ BMW R1150RT

Has anybody tried an electric oil pressure gauge instead of a mechanical? (screw a sender into the adapter instead of the hose) Randy in Phoenix

Well you guys. I couldnt very well add a fuel gauge and have it stay on my handlebars and I didnt want to mount it up by the speedometer so.... I made a custom gauge mount to fit the OEM dash. Still a work in progress but here are some pics. I used a 1/8" piece of scrap aluminum that was...