jet

In Mikuni terms, what are the sizes of the stock jets (PAJ1, PAJ2, MAJ)? regards from my tapatalking android...

Hi. I've a full exhaust system on my bike with stock jets. I've been told it would be a good idea to up jet to stage 1 0r 7 What are the pro's and cons of both? Will 7 cost me my v-boost? Is there much real world difference betweeen them or is it just the seam of your pants difference? Any...

A while ago, before I pulled my carbs apart, I posted a question. In the end I got some 147.5 mains. I'm doing some carby work now, and it's a little different from what I previously guessed. My '85 has had the 2 150's changed to 152.5's already. (So it has 152.5's in it.) I guess the rest...

I had a few different mechanics look at my bike, (and posted several questions on here) but nobody could figure out exactly what was going on. I finally took it to M Tech in Bend, Oregon and Matt spent a long time looking into it. He built a Honda 1000 engine that earned a land speed record...

Have morelys muscle kit air lid dale walkers 4-2 dyna 3000 setting #4 #150 main jet a/f 2 1/2 turns 1000 ft above sea level and still rich running around 12% a/f I have 145 and 147.5should I use 145 . Was at 152.5 mains changed then dyno with 150 didn't change much

Hey all, I am really close to pulling the trigger on one of Sean's kits. Instead of trying to filter through all the previous threads, thought I would start a new one specific to my bike. I currently have a stage 1 with a Hindle 4-1 installed by po. Does anyone know if the stage 1 has...

I am runnig a set of cobra slip-ons currently on my bike however I bought a 4-1 holeshot exhaust recently especially since a lot of people on here told me full exhaust will make a much bigger difference. I ordered a set of 147.5 jets from Sean for the cobra slip-ons (that was before I...

hello, new here and hope i'm posting in correct sub-forum. i recently purchased a 97 Max, and I want to have carbs rebuilt and a Dyno Stage 1 kit (or similar) installed. i can tell there are issues with the carbs (smell gas, some minor back-firing etc) and figure since the bike is 14+ years...

Wondering how to install this thing the hose t fitting any pics on yours

I want to check my bike to see if theres a jet kit. but i don't want to have to resync it as I don't have the tools or the know how. I beleive I am running way to rich and was told to check the jets and what not. Is this do able with out having to resync?

I've jeted my max left the stock apj in it 170 put the dj 165 when it hits. 6000_ 7000 it stumbles then gos on needle is 3rd from top would that be a needle issue. It was running leans. Why I.jetted it has supertrapps 6 disc open end cap

I'm going to do one I have supertrapps open end caps k&n stock box 8mm taylor wires, should I use 147 or 150 mains where should I run the clip on the needle any info would help

Hello, just took my carbs apart to set the float levels, while apart i would like to check the pilot jets and clean them how do i get the pilots out or should i say take the jet block out????i took the two screws out but its not coming out so before i break something i will ask what im missing???

hey sean, couple questions/thoughts on your jet kit that maybe others have wondered. you use a similar oiling system as the stage 7. Why do we need the oiling system hooked up to the fill area with the airbox when its not there stock? I think i understand why the stage 7 needs it as the...

Does anybody have a Vmax carb apart ? I'm tying to find the head diameter of the main fuel jet. It's either 6mm or 8mm - I'm thinking it's probably 8. I'm looking at jets on this website : http://www.pjmotorsports.com/mikuni-jets.html The paj2 is jet part number N102/221 with the 6mm...

Hello all, New to the forum. I searched around and couldn't find the answer so I figured I just ask. New to V-max bikes. Bike has been running poorly, needed a little choke to run. I figured gumed carbs and pulled them to clean. Float heights were all over the place and mixture screws also. They...

This week only save 25% on Jet Hot coating your exhaust.:eusa_dance:

Is it worth going up to a stage one? What about a Morely jet kit? I wont be doing any other performance mods after this if that makes a difference. Even though 06 Max did an outstanding job setting up the carbs and stuff I still have that itch for a little more power. Thoughts?

Can someone tell me and show me with pictures what the jet sizes in a stock vmax should be? I am ignorant and slow so please don't tell me the main jets are 155 and then no more . Paj1, Paj2 and the jet in the float bolw ar what I am after . What gives the best performance with out screwing up...

Got a '92. Has the kerker 4-2-1. Think it's k series... pipe was mfg before supertrapp was involved. Bike has k&n filter and is running the 2.25 inch comp baffle with no packing. I know it's been jetted but I don't know sizes. I have always thought there were 3 stages of jetting... 3 being with...