lever

Ok, in my quest to make my bike the perfect bike for me, I have found I want some changes in the braking department. While the stock Vmax brakes seem to do the job just fine in most instances, I do know that they can be better. With the front brakes, the pull feels lighter than what I would...

I installed the Wild Hair peg lowering mounts. It helped stretch out my legs but the pegs they sell were not very wide so replaced them with some Arlen Ness versions which are much wider and comfortable. However, the lowering mount has moved my foot outward slightly and I am kinda of...

Hi all: I hope everyone is doing okay and staying safe. Question for you: I just installed a Nissin radial clutch master cylinder on my Max, but I hate the stock lever....too long and "clunky." I'm hoping to find a company that sells aftermarket levers for Nissin hydraulic radial...

If someone can, please help me. I followed all the directions and bike starts in neutral but I can pull in clutch to try gears. Anyone know why? Thank you

Hi Mad maxers, I just bought a 2001 VMAX stock in great shape with 9400 miles on it a few weeks ago. Although I've ridden bikes for a long time this is my first V-Max so I thought I'd ask for advise before I work on it. My Clutch lever isn't engaging. Basically when I pull the lever, it pulls...

Still considering myself a newb to VMax and still considering myself rusty on the riding, I've really been trying to nail down the perfect shift on my VMax. It's definitely gotten better since I first bought my VMax. I've progressed from a clunk to a nice snick. But I want better. :) So this...

Hey all, I just replaced the clutch on my 93. Got it all back together and checked the lever... Rock hard! I pulled it back down again (all plates out) but the lever is still rock hard... I bleed the system but it pumps back up to its rock hard state... And advise? Nate

I swapped my stock Vmax clutch master and lever for one from a FJR1300 so I could have the adjustability of the lever. So the switch on the FJ has three prones, but when I looked at the wiring diagram is only showns the same two wires that the Vmax has. Blue and Black. I tried sticking those...

I just installed Kawasaki ZX-14 reservoirs so I could fit adjustable levers to my 2000 VMax. The brake needed bleeding but after was tight as a drum and works perfectly, but the clutch is as floppy as a wet noodle and I just drain the reservoir when I try to bleed it. My bike is currently...

Hi all, Does any1 know if any after market levers will fit a 93 max?

I have a set of adj levers from wxtracing on eBay for Gen 1 Maxes. They are now almost twice as expensive as when I bought them. Does any other vendor sell them? I have a friend wanting them but would like to spend less then $80.

Right now the carbs are off the bike but while the bike was still running I had an issue where I had to hold the choke lever if I wanted it engage. When I would release it it would shut off. Have to hold this lever until the bike was heated up was no bueno. The plungers are all engaging at the...

Hi everyone, Im chasing a choke lever assembly for the first generation vmax, need all levers bars and bushes. thanks Rob

Hello, First time poster here... I had a bit of an accident(16 yr old girl not paying attention smashed my foot/bike) and it broke the shift lever and foot peg.. i'm not having any luck finding anything on the web as far as an aftermarket one... does anyone make a billet shifter for the VMAX...

I placed this topic under general because I'm not sure, although I have an idea of where the specific problem lies. I just bought a 2005 VMAX anniversary edition. It has 9000 miles, always garage kept and looks brand new. When I bought it, it ran perfectly without any issues and I decided to buy...

Hey guys, How do you raise the gear shift lever a little bit? I got some beefy new boots and would like a little more room to get them under the shift lever (1/4-1/2 inch or so). Thanks.

Gonna explain this best i can, the brake lever when you pull it slow it is sticky and sqeaky but if you pull it hard like for a hard stop its fine, the slower you pull the worse it is, and the noise seems to come from under the resivior where the plunger is, also when i open the cover brake...

So when I am riding and I pull the clutch to shift I only have to pull it a very tine bit like 10% or something and it releases. Is that a sign my clutch is going out?

Any Better Levers out there? Hi all, just wondering if anyone has tried different clutch and brake Levers,(my hands must be a bit short) I have to fully extend my fingers and I only grab levers with the end joint of my fingers which stars to hurt after a while especially when its cold...

Does anyone know the part# for this Screw , washer set up. I noticed mine are missing so Choke lever floats and can not set choke without holding. Just bought the 88 Vmax 1200 and have started to replace missing parts and screws as I discover them.