light

I've read a lot of posts on here regarding the cybermax headlight and how inadequate they are for night driving......which I can personally confirm.....and several people have suggested going to a 100w bulb instead of the stock 55w bulbs. The stock bulbs are parabolic single filament "H3" 55w...

Does it have any effect on the fuel pick up ? My '98 works on reserve just fine , but sputters when switched to on , with plenty of fuel in the tank.

I installed new front turnsignals that do not have running lights. I am wondering if this is causing my led brake light to stay on constant? I see in my wiring diagram that the front turnsignal wiring runs to the brake light. could this be the problem? How would i fix this? Thanks for any help.

Gotta be legal. And please, nothing in the $1B range, y'know .. keep it reasonable in cost. No titanium spokes on chaindrive converted /no front brakes drag bikes here. I'm just curious as to how light one of these can be made? Some parameters to stay inside of are: *** Single seat = YES...

HID H4 Bixenon bulbs on the market these day are all the same design, cutting part to the shield resulted in much more light in front of the bike, like I added fog lights, this together with removing the umbrella cap produce much more light than a bulb without modification without increasing...

http://raptorperformance.com I have found a vendor selling these shift lights in single or dual mode at a very low price. Single mode - $90 FREE SHIPPING Dual mode - $110 FREE SHIPPING I haven't found anyone to touch this price. The next closest is COO single modes for $100 to $120 +...

So I saw that my oil light went red during acceleration about 3 weeks ago and I did some reading and it seams the oil censor is in the front of the pan and not to worry. when I first saw it I was really getting on it but now i am seeing it when I am just kinda getting on it, not hard at all. Its...

Need to buy a new front brake light switch. Called the dealer. $134!! Any suggestions???

CHEAP brake light flasher If you like the idea of the Back Off brake light module, then you'll love this one I have found for a fraction of the price: http://www.bigrigchromeshop.com/Merchant2/merchant.mvc?page=BRCS/PROD/LITWH/UP90655 It does the same as the Back Off module and is fully...

Just wanted to pass on praise to harlan... I bought his shift light back in dec 2010 and just got it installed and had questions on how it worked.. sent him an e-mail last night he replied within 1 hour and walked me through what I did wrong.. e-mailed back and forth untill I got it...

so i wanted to order me some new bulbs that resided inside the tail light housing. its raining cats and dogs and the stupid hayes manual doesnt specify what bulb to get. does anyone know what the bulb numbers are so i dont have to go play in the rain

Hi guys, I'm out wrenching on my 94 and have a problem I'm hoping someone can help me with..... last year I replaced my stock tail light assembly with a led unit but I cant remember where I got it from, much smaller light that tucks under the fender nice with a plate holder that comes out at an...

Hey guys looking for the aftermarket part # for these bulbs neutral,turn,high beam,etc they are 12 volt 3 watt.I believe T10 is the part # but only a guess looking in the electrial section but either blind or no dice info not there.Yamaha part # is 42X-83517-00-00 if that helps looked on the net...

Looks like a good product for the price of $87 shipped to me, anyone have this one on their bike? I plan on ordering one soon so if you have one, or seen one let me know what you think of this tail light compared to stock. How is the visibility and ease of install, just plug and play...

I am thinking buy a Vrod headlight then swap with stock light,is this possible? I know the bracket must mod but concern about the size will it fit?

Has anyone disected a signal light relay pack or otherwise found out how the internals work? Anyone draw up a schematic?? I've done the LED conversion and have the fast blink rate like everyone else. I've tried adding resistors in series in both legs of the left and right signal light circuits...

"Tach Input - From Tach line of the engine computer or the Switched Side of an ignition coil" Can I tap into the #1 coil RED signal wire for the tach pick-up for the shift light?? Same as I did for my T-Boost signal?? TIA........

This a video of the SST shift light I installed on my 2004, works great! Installation pictures in the electrical section. Available on Ebay in black or silver. http://www.youtube.com/watch?v=4zrPKtG6MlM Bill :biglaugh:

After the recent bout of douche-baggery from UFO, I decided it was a good excuse to get rid of the UFO tail light that came on my bike, which I never particularly liked anyway. Didn't think the oval shape "went" with the bike. I started looking around for a replacement and found the monstermax...

I always like being a little different so I ordered a SST shift light today for my 2004 Max. The lights are made in the USA,and supposedly have a lifetime warranty. They look allot like a Raptor light but use a digital readout on the side instead of pin switches. They come in black and silver...