light

Dont know if this has been covered , if it has , one of the moderators can delete this . I picked up a $7. LED truck side light at CAP ( Consumer Auto Parts here in NE ) Same size as the reflector that's in the grab rail and the holes even line up . You need to drill a small hole for the...

I mentioned this in what was more of a story about my ride Sunday. Now I ask here to see if this is normal. Oil level near top marks on the sight glass. Roll on in 4th from about 5,000 RPM. Oil Light comes on and stays on at 8,000-8,500 RPM. I looked at the light, then the RPM and...

Think i'm finally going to break down for a shift light. What's a good average priced one? Who likes what and why??

Any of you guys have issues with the harland shift light? This is not my first install. previous one works perfect. This one, when i start the bike doesnt run on all cylinders. I undid the green/tach wire from the cluster and bike ran perfect, then touch the wire back to the grey on original...

This summer a friend of mine spent $400 on a light kit for his hog. After a few adult beverages I mentioned I could probably install one for much less. After some trail and error I found these at Auto Zone for $22. They include two 12" strips that can be cut so don't waste your money on the 8"...

Alright, Big shout out to jacoviii for bringing my attention to the possibilities of this light! Made for an 03-06 CBR 600rr/ 04-07 CBR 100rr, its actually a perfect fit for the max and only cost about $65 shipped. I received it in 4 days and it looked like a well made unit. The included...

just got a new tail light it fit 99.9% pics to come http://www.motodynamic.com/product_info.php?cPath=1_2&products_id=185 use these instruction the should help http://www.motodynamic.com/installation/D-MST-B-BST.pdf

Been looking for a waterproof shift light with little success. Anyone had any experience with this one on eBay? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=260654647715&ssPageName=STRK:MEWAX:IT

I have a Python shift light. I wash my bike and I think I must have got the shift light wet. At first it would light up randomly then the next day (hoping it would dry out) I checked it and now I get nothing. My question is has anyone had this issue before? Can I save it? Or should I plan on...

Ideas?

Need a little help from the max experts. The headlight would stay on after starting. I replaced the relay however problem still there. I can rap on the rt hand grip after starting - like the Fonz and light comes on. Any ideas???? Thanks any help greatly appreciated...... Brad Va :bang head:

:ummm: my bike absolutely runs beautiful, but..this morning when i took off when the light changed, i noticed my oil level light came on for about a second ,when i hit about 4 o5 k rpm's..i was still in first gear...after changing gears it would not come on again. the bike was warmed up ...

hey, guys. pickin up a '92 this weekend. was reading quite a bit on the forum and haven't got a rear clear idea of what to buy. i'd like to replace the oem brake/tail light with something low pro and do the same with the turn signals. thing is... i don't really care to go the led route. what am...

I was testing my buck shot handle bars last night when i noticed for the first time the oil light came on. I think i read that somewhere that it was normal but i didn't find any answers when i did a search. I checked the oil level and that looked fine. I guess i'll put an cycle 1 oil pressure...

Tried to install new headlight and bottom bolt was 2mm larger than the hole. Removed sleeve shown in picture two and it bolted up. Did yamaha go with a smaller bolt after 85?

Not sure that I have ever seen mention of the Speedhut SST Revolution shift light on here, so I thought I would mention it as another alternative for the Vmax. It hooks up just like the Raptor, three wires to the back of the factory tach. It has a 3 LED readout that is used for programming...

Hey guys, I just made this last night. I took a 24 LED string and tied it into a ring. Then i placed it in my brake light. I figured out the left side of each rear bulb is the power side for when you step on the brakes. I soldered the power wire to the bulb. Then i wedged the ground wire...

What is a good rpm setting for a shift light to get the best result?

Did the customs tail light from http://www.motorcyclemods.com/ (vmax specific) today. Looks very nice! The hardware is awesome. The light is mounted to a mirror finish plate. Bright LED. I'll post some pics soon!

I filled it up last night drove 10 miles today and my light came on, about a mile latter began to sputter, switched to reserve and bike ran fine. So i pulled in to a gas station and the bike took 1/3 gallon IT WAS FULL. So i put it over to ON and drove a half mile light came on and bike began to...