springs

I need 2 springs that go into the front foot pegs. Can't order from Yamaha, they only sell the complete foot peg. Also can't seem to find on ebay, etc... I need them for project Radian. the old Radian ones don't fit in the new foot pegs. They are too wide. the Vmax ones will fit, I tried...

I have racetech springs installed and I'm getting free springs from progressive because of the promotion they are having. How do they compare? Are progressive better? Should I swap them? or just put them on ebay? Vitek

Looks like through may: http://www.progressivesuspension.com/springpromo0310.html I'm sure morley could hook people up as well..

New springs are on the way and I searched everywhere, but no firm answers, so I will lay out some questions I have. #1. Do you HAVE to remove the fork tubes to remove the old springs? I would think lifting the bike, and draining (or sucking) old oil out would work, or is there something I am...

I am looking for a set of stock valve springs from a 1st gen. If you have a set for sale please PM me. Gary

Hey guy's aren't the front STOCK springs an even spaced wined from one end to the other? Progressive are tight at one end and wider at the other.

I recently purchased both the Ricor Intiminator and Progressive Springs. Does any one have experience with both who can give an opinion whether I should use one other the other? My understanding is that I really shouldn't use both.

here is a link to some pics we took from Eureka Springs We had a total of 20 bikes and 24 members. anyone else that has some pics are welcome to add. later all and stay safe michael http://tinyurl.com/l34yuv

So ... Who's going? Rally in the Ozarks June 12th-13th Eureka Springs Arkansas Edelweiss Inn 479-253-7316 http://www.edelweissinn.com/

i bought progressives (standard size). do i have to remove the bottom fork leg, or can i just swap the springs by pulling them out the top of the fork? thanks for any help

Plan on changing the fork springs on the bike as I have to change my fork seals. Was going to get some progressives from Sean but just wondering if Racetechs are any better. I just picked up some progressive 440's so I usually try to match components assuming the developers plan on there...

Just wondering if anyone here besides me is planning on going? http://www.eaglesnest-fullmoon.com/Upcoming%20events.htm

hello, can't make up my mind between constant rate or progressive rate front springs. I want a smoother ride and less dive on braking. I plan to use 15 wt oil and Racetech emulators. any comments, advice, rants on this topic appreciated. thanks, Smackdown

Hi All, Progreasive springs arrived and are #'ed 11-1129. Is this correct for a 98 Max ?????? Also says to use stock spacer???? Depends on rider weight, no???? TIA, Lew

All, Abe and I need your help on a few things. Should we put solid motor mounts on this bike? I am doing this on my drag bike, but I didn't know how much vibration this causes and if the frame strengthing out-weighs the negatives. I personally like to "feel" the bike, just as long as parts...

Any recommendations for adjusting preload on the OE springs without the toolkit tool? Aftermarket tools possibly? I don't feel like spending almost 200$ for an OE toolkit.

I'm getting ready to upgrade the forks with at least race-tech springs. Why do I need the gold valve emulators? I'm 6' 260lbs and ride semi-aggressively in straights and turns. Thanks

I have two sets of stock springs (Front) and spacers if anyone's interested... (We just upgraded to Progressive) -Joey

Hi, I just removed front spring on my 89 and whene I measure oil level it was 11.5 in. from the top.In manual is 5.5 in. I drain the oil it was 400 ml there,I think in manual is 451 ml.So I put 451 ml of oil in there and now oil lavel is 11 in. It dosnt make any sens to me. Thanks in advance...

I wanted to install Progressive Suspension fork springs on my 2003 V-Max, but all the manuals I reviewed only covered the complete disassembly of the forks. I couldn't find anything here as a how-to, so I am writing this up. The process is really very simple and can be completed with simple hand...