switch

hi, love my max, even with small fuel tank, my 88 only runs with sw. in reserve. it isn't that big of issue but i like for everything to work on my bikes. any info will help. thanks, mark

Just did it and nothing. Cut the wires coming from fan into male adapter and spliced with wires going into manual switch. Nothing at all, bike was running too. Am I doing it right?

So, there are no nice low profile switches made for motorcycles that don't add to the clutter. That is unless you have a full dresser or a sportbike with lots of plastic hide stuff in/under. I have found one nice switch actually, I believe from Pingel but it is $$$$$. Anyway, found this sweet...

I saw on Vmax Outlaw he sells a temp unit that allows the fans to come on 20 degrees sooner. I searched and didn't see any DIY on a switch setup. Would you all recommend the switch vs the kit from outloaw? Thanks, Sid

Good morning, folks: There's an electronic piece that screws onto the underside of the clutch master cylinder. The button/rod on it is compressed/ decompressed by the actions of the clutch lever. First of all, what does it do? (I understand it's a safety feature involved in preventing...

does anyone know what wire to ground to run a toggle switch for v boost on/normal operation ?

Hi folks: I've seen the headlight cut-off switch mentioned in this forum a few times..any of you know a place I can get one for the Max? Thanks. Elimax

Hey Guys....Can anyone recommed how I can wire a switch to control just the vboost servo? Let me explain......I run with the vboost unplugged in the open position full time. I would like to figure out how to devise a toggle switch that I can close the butterflies via the servo to start and warm...

Has anyone done a mod to put a V-boost on/off switch on the handle bars?? Probably already been talked about, lemme know!!

When turned on the engine will quit. I can't find anything in the shop manual that gives me a breakdown on this switch and curcuit. The engine runs fine as long as the reserve fuel switch is not turned on. Now this has done this as long as I have had the bike so the switch may be on and when...

Okay guys, put your thinking caps on. I'm looking for a way on a first gen Max to turn a 12v DC device on only in 2nd, 3rd and 4th gear. In other words, I need a way to turn something on without pushing a button when the bike is in those gears. I don't want to turn it on in first gear under any...

Hey guys can someone help me out?I would like to know where to buy the manual fan switch.Thanks in advance!!!

hi there, i have a max 96... i was wondering what exactly does the fuel switch do? are there two fuel pumps? or does it turn off a cylinder? :)

This is just for your information. I recently purchased the air shifter setup from Cycle One-off for the vmax(by the way it looks awesome) and I was just wanting to document the air kill switch goes to all four coils for the proper kill time. I did talk to Tom himself to confirm. Thanks Roy

I was looking around at some pics of Vmaxes with monster tachs on them. It made me think.....since it would be more vital to have a better view of the tach rather than the speedo, would it be possible to mount the tach in place of the stock speedo(i know this has already been easily done) and...

Hi All, I know there is a thread about a fan switch installation but I think my question got lose in the thread so I am starting my own. I wold like to do the mod that adds a toggle switch so you can turn your fan on at anytime and I would like to wire it so it turns off when I turn the...

I'm still getting power cut out in the middle of running..now when cold and after accelerating hardish..I'm suspecting the side stand switch or my new tach connection. First how tight is the nut that holds the plate which pushes against the switch supposed to be? Very tight or snug or finger...

i was wondering if anyone knows why there is a "knockout" on the back top half of the left hand switch gear. reason i ask is i recently bought a set of chromed switch housings off e-bay. i got them the other day and as i was installing them i noticed that there was an extra square hole on the...

Anyone know what size and thread pitch the V-max Fan temp switch uses???

Hi i had an idea to be able to turn v-boost off, not 3000 just off incase it is raining. I could purchase a t-boost and it would acomplish this, but i think that if you just install a switch on the RPM lead to the vboost controller that it will not open as it does not receive the signal to(gray...