wiring

Whoops brain dead..figured it out

Here is a simple question. Are my front coils wired right? The parts breakdown in the manual show the front coils with the right front plug going to the right front coil. But on my bike the right front coil goes to the left front plug. Which seem to make sense because it is easier to connect...

Howdy, I'd like to know about all of the points in the electrical system that should be soldered. So for example, where is the infamous "crimp" so I can find it and solder it? And should I rewire the regulator and/or replace the stock regulator? What other connections should be soldered and...

When I bought my Max, it had a small switch installed to change the Vboost from 6K to 3K. I'm installing a LED lighted switch to take it's place but the only way that will work is if the switch has a path to ground. I metered the original switch and it looked like it was grounded on the one...

I am in the process of changing my turn signals . When i took the headlight apart there are three wires on my stock signals, black, brown, blue. Now the new signals have black, black/white,red. What goes where? I guessed once and blew a fuse, thought i'd ask before i blow another. Thanks

When installing my ignition advance circuit I removed 2 wires from the pressure sensor connector to clean stuff up a bit. Stupid me...I forgot how two of the wires go. It's a 3 wire connector and I removed the hot wire (red/white or red/black for late model) and sense wire (black/red). Could...