aftermarket bars

[baloo]

hi newbie here.could u nice people reomend some nice WIDE aftermarket bars links would be nice and pics:biglaugh::biglaugh:

 

[timscues]

contact sean morley w/ morleys muscle or john with RMS sport max

 

[Rusty McNeil]

Pro Taper SE Series in the "Carmichael Bend"

They're about 30.5" if I remember correctly.

Everyone I know that's given them a shot loves them.

Easy enough to find on pro tapers website.

You can look in my album to see what they look like on a Max.

Shouldn't be more than $80 tops

I ran some wide drag bars for a while but with no rise they're just not very comfortable for me.

 

[one2dmax]

I have a variety of bars and one "sale" bar that we just took off a build project. Plenty wide! Email me at [email protected]

 

[Redbone]

I run a Flanders drag bar that's 31.5" wide but they are expensive! Check out Sean's selection, he should have what you need/ want!

 

[tugla]

I run a Flanders drag bar that's 31.5" wide but they are expensive! Check out Sean's selection, he should have what you need/ want!

+1 on both statements...unk:

 

[one2dmax]

The used bar I have is a Flanders.

 

[maxcruiser]

Pro Taper SE Series in the "Carmichael Bend"

They're about 30.5" if I remember correctly.

Everyone I know that's given them a shot loves them.

Easy enough to find on pro tapers website.

You can look in my album to see what they look like on a Max.

Shouldn't be more than $80 tops

I ran some wide drag bars for a while but with no rise they're just not very comfortable for me.

I also have Protaper SE Carmicheal series bars. These work the best for me.

Mike

 

[davesax36]

What's the width of the stock bar, again? I'm leaning towards pro taper Carmichaels. I had renthals on my FZ1 and loved them.

 

[ridinnoshiftin]

Here is all the info you will need on the Pro Tapers. This was the best price I found as well, $60.14 with free shipping for the Carmichaels.

http://www.perfmoto.com/pro-taper/c...ebars/handlebars/silver/?iwd=9087&picid=29239

Todd

 

[CaptainKyle]

I sell tons of new stuff to but i dont advertise it much. I will admit i cant compete with some of the big peoples price

 

[Redbone]

What's the width of the stock bar, again? I'm leaning towards pro taper Carmichaels. I had renthals on my FZ1 and loved them.

The stock bar width is 27.5" is what I measured on my stock setup.

I also have Protaper SE Carmicheal series bars. These work the best for me.

Mike

I have been thinking about trying a Pro Taper setup, but haven't pulled the trigger yet. Probably need to get with Mike and see how they feel.
I mean that in the best possible way Mike, I'll be gentle! Promise!:biglaugh:

 

[CaptainKyle]

If you want to look on Parts unlimited website or Tucker Rocky I can get parts from both of them at a little below retail . It is pretty easy to search both of there sites.

 

[ridinnoshiftin]

If you want to look on Parts unlimited website or Tucker Rocky I can get parts from both of them at a little below retail . It is pretty easy to search both of there sites.

Makes a mental note to check these sites out!

Todd

 

[davesax36]

Anybody's cables get tight with the wider bars?

 

[Redbone]

Anybody's cables get tight with the wider bars?

I've had no issues - stock electrical switches and after market SS brake/ clutch lines.


Sent from my iPhone 5 using Tapatalk w/ vboost!

 

[Biker Dash]

The stock bar width is 27.5" is what I measured on my stock setup.

This is probably one of the reasons the Max feels so right to me. I prefer narrow bars, and had the same width dragbars on the last bike I had.

 

[baloo]

all sorted a friend bent mine from a set of straight bars . just copied the ones that was on. except 4" wider in middle . ever so slight kink from the bend .any ideas who can do this with stainless

will post pics when i get to the bike