I have got a Rowe Electronics Amplink installed. It cost me the space for the OEM tool kit, but it is in and functional. I will build out a better tool kit and keep it in the tailbag. The Amplink provides six new circuits for the bike with a few neat features. The unit is off unless the key is on as I tied the Trigger One wire to ignition. The circuits stay cold for 10 seconds so there is full power to the starter motor.
I have plans for three of the circuits and would do a 4th if I can ever get MC Cruise to do a unit for the Gen2. I did get some additional parts to make this work. Notably I got a six gauge ground cable that I ran under the ground cable connection for the battery at the frame. The battery is not consumed by a lot of other wires now.,
Here is a very messy picture. There is a lot of clean up to do and I need to add my other devices to it. The Mod Monkey is calling my name.
![Amplink II.JPG Amplink II.JPG](https://cdn.imagearchive.com/vmaxforum/data/attachments/82/82518-ed6f61a27305b611c07c924e9a762457.jpg)
I have plans for three of the circuits and would do a 4th if I can ever get MC Cruise to do a unit for the Gen2. I did get some additional parts to make this work. Notably I got a six gauge ground cable that I ran under the ground cable connection for the battery at the frame. The battery is not consumed by a lot of other wires now.,
Here is a very messy picture. There is a lot of clean up to do and I need to add my other devices to it. The Mod Monkey is calling my name.
![Amplink II.JPG Amplink II.JPG](https://cdn.imagearchive.com/vmaxforum/data/attachments/82/82518-ed6f61a27305b611c07c924e9a762457.jpg)
Last edited: