Best cdi I can buy??

[Adrian]

Need a link to an upgraded cdi.. put in the R1 r/r and COPs kit ..

 

[Bill Seward]

What's wrong with the one you have?

 

[[email protected]]

Only options I know of are

1. Get the OEM repaired. John Furber/Blue Ridge Sportmax says they can.
2. Buy new/used OEM
3. Buy a Ignitech. Fully programmable, aftermarket ignition. Contact Sean Morley. [email protected]
4. Buy a Dyna 3000 ignition. I think the only functionality it offers is an adjustable rev limiter and a few selectable timing curves.

 

[Adrian]

What's wrong with the one you have?

It is barely firing the front cylinder on idle .. but is perfect when on the road

 

[Adrian]

Barely firing the front cylinders on idle

 

[Adrian]

Only options I know of are

1. Get the OEM repaired. John Furber/Blue Ridge Sportmax says they can.
2. Buy new/used OEM
3. Buy a Ignitech. Fully programmable, aftermarket ignition. Contact Sean Morley. [email protected]
4. Buy a Dyna 3000 ignition. I think the only functionality it offers is an adjustable rev limiter and a few selectable timing curves.

Is the dyna 3000 a plug and play function?

 

[[email protected]]

Yes, plug n play.
I believe others have stated that you should have resistors in your COP harness if you are running a dyna ignition.

Sent from my SM-G930V using Tapatalk

 

[sdt354]

The rev limiter in either after market unit is worth the price. I'm running without the resistors. No issues in 3 years.

 

[caseyjones955]

I have also read that the Dyna will fry with resistor-less COPs. I just installed an Ignitek on my 89 Venture along with resistorless COPs, and plugged the laptop on it to see what all I could change and to set voltages for the MAP sensor option that came with it. It's a slick box, you can even have it control your Vboost. I'll be using an Ignitek on the Vmax as well because I have had trouble with my Vboost control module and my homemade COPs came out real purdy since I didnt have to stuff resistors into them.

 

[Bill Seward]

I had a scare a while ago thinking the genie died in my TCI box. Turns out it was OK. But, if I ever needed to replace it, I'd get an Ignitech from Sean. Without hesitation. There are plenty of guys here that will be glad to give you good advice.

 

[fmcandrew]

The new Dyna's are fully programmable, but come factory preset to be a plug & play...been running one for a couple years...