Breather hose

[96KyVmax]

I Know this has been talked about how big a pain this is to reattach to bottom of airbox. Some people use 1/2” rubber hose with hose clamps. I thought about getting nylon braided hose ( won’t kink as bad as regular rubber) with hose clamps . While my carbs are getting rebuilt this is good time to address this . Sound good what works for you if not using factory crankcase hose ?

 

[maleko89]

It's a pain if you don't move the coolant expansion tank out of the way. Just lift it up and set it off to the side. Then attaching hose to bottom of air box is no issue.

I know there is a clamp on each end but I've only ever had the one that attaches to the engine side. No clamp required for airbox side.

Mark

 

[wayne billings]

To 96kymax--- I did what maleko89 does, it works fine. cheers

 

[Yvonne Blaz]

Thanks maleko89 I'm just about to face this same issue & for me your advice comes at the most perfect time .