Keyless gas cap????
- Thread starter GreggyG
- Start date
Help Support VMAX Forum:
If you use the search function, you can find there are some ways to get that result. One used for those who have a Corbin seat, is to add a short piece of rubber gas tubing, and then a female screw-on fitting, and a male threaded cap.
child_of_fire
Well-Known Member
I never found such a thread either in all my years here. And I never found a cap that was reported to work. Bothered me enough to make my own.
Can you share what you did?
Redrum
Well-Known Member
- Joined
- Jul 1, 2020
- Messages
- 202
- Reaction score
- 117
I have a Corbin seat and leave an extra key in the cap. Maybe not the safest in the world but I live in the sticks. Who would think look in a flap in a seat to find a key???? Maybe more people now.
Probably a safer thing to do would be to get a cap from a bike with different ley.
Here is a post from a while ago that I posted about just this subject
You have to change the tank neck to accept a twist-cap. Some solutions below.
Some people with Corbin seats use an extension to put the gas cap closer to the top of the hole in the seat, and then use a screw on male & female gas cap and tube. The tube attaches by fabric reinforced rubber gas line rated tubing to the OEM gas tank neck w/hose clamps.
Here's something you would need to attach a piece of tubing to. They have aluminum, stainless steel, and steel bungs (the female threaded part).
https://www.ebay.com/itm/2214289770...a7BYg3-rBmcnb31o58QUFQ08QoJ86R0RoCrqwQAvD_BwE
You could also hit your local parts yard and remove a neck and screw-on cap, just find something the same size as the VMax neck which is just-over 2" o.d. Take the rubber tube too, as that material is expensive if you want to buy a length. I think I paid $20 for a foot at NAPA, years ago.
7/2/24
I just tried that eBay link and it is stale but if you go on a search there for the type of fitting I described you should be able to find a current offering from multiple vendors
You have to change the tank neck to accept a twist-cap. Some solutions below.
Some people with Corbin seats use an extension to put the gas cap closer to the top of the hole in the seat, and then use a screw on male & female gas cap and tube. The tube attaches by fabric reinforced rubber gas line rated tubing to the OEM gas tank neck w/hose clamps.
Here's something you would need to attach a piece of tubing to. They have aluminum, stainless steel, and steel bungs (the female threaded part).
https://www.ebay.com/itm/2214289770...a7BYg3-rBmcnb31o58QUFQ08QoJ86R0RoCrqwQAvD_BwE
You could also hit your local parts yard and remove a neck and screw-on cap, just find something the same size as the VMax neck which is just-over 2" o.d. Take the rubber tube too, as that material is expensive if you want to buy a length. I think I paid $20 for a foot at NAPA, years ago.
7/2/24
I just tried that eBay link and it is stale but if you go on a search there for the type of fitting I described you should be able to find a current offering from multiple vendors
The gas cap always reminded me of a radiator cap. I wonder if there is suitable (car?) radiator cap out there somewhere?
Some choices.
Two inch tube, removable gas cap screws-on, but allows a 'push-through' of the gas dispensing nozzle to eliminate removing the screw-on cap. A 2" o.d. tube is close to the VMax neck. $44 from Summit Racing. https://www.summitracing.com/parts/tnk-ffn
Prefer a pop-up knurled cap you remove by a screw-on/off function? Same supplier/manufacturer & sizing. $95
https://www.summitracing.com/parts/tnk-pu3c#overview
This one is the priced-less leader @ $40. Same dimensions 2" o.d., and the tube is 5" long. Same supplier/manufacturer.
https://www.summitracing.com/parts/tnk-fn-cc?rrec=true#qanda
Two inch tube, removable gas cap screws-on, but allows a 'push-through' of the gas dispensing nozzle to eliminate removing the screw-on cap. A 2" o.d. tube is close to the VMax neck. $44 from Summit Racing. https://www.summitracing.com/parts/tnk-ffn
Prefer a pop-up knurled cap you remove by a screw-on/off function? Same supplier/manufacturer & sizing. $95
https://www.summitracing.com/parts/tnk-pu3c#overview
This one is the priced-less leader @ $40. Same dimensions 2" o.d., and the tube is 5" long. Same supplier/manufacturer.
https://www.summitracing.com/parts/tnk-fn-cc?rrec=true#qanda
Similar threads
