Looking At Ideas On Tail Lights

[patate657]

Hey guys post some pictures of your aftermarket tail lights. I need ideas. Thanks

 

[Fire-medic]

The 2003-'06 CBR600 curved taillight is a popular one. You can get it so it functions as both a pair of turnsignals and a tail/stop light. Other years work. Look here: LED Tail Lights Integrated Sequential CBR600RR CBR1000RR CBR250R Grom (motodynamic.com)

Too much resistance?? | Yamaha Star V-Max VMAX Motorcycle Discussion Forum (vmaxforum.net)

Looking for ideas on tail lamp conversions | Yamaha Star V-Max VMAX Motorcycle Discussion Forum (vmaxforum.net)

 

[V-Four]

I did the CBR myself, but these days theres more to choose from.

This is a slimmer light, not 100% sure if it fits, but it would be similar setup to the CBR mod.

https://www.eaglelights.com/product...integrated-turn-signal?variant=13210855145585

Along with the CLEAR CBR light, I also have this, (clear one) which is going in place of the rear "reflector". (I quote reflector, as I do not have the reflector, just the piece with a zillion holes drilled in it, from past lives, which I recently filled and sanded Smoove).
This one also flashes and has "sequential blinking".

https://www.motodynamic.com/univers...ed-turn-signal-led-tail-light-smoke-lens.html

Do not cheap out on the 10- 20 dollar cheapos. I had an cheap oval Brake/Running LED in place of the reflector. after about a week (maybe less) I noticed about 4-5 of the 40+? LEDs had cut out on me. Still worked , but looked stoopit.


Now I spare no expense on my baby. (if I can help it)

Found a pic of the stupid OVAL LED cheapo. They must make some good ones, but usually ya get what ya pay for.






T$

 

[patate657]

I did the CBR myself, but these days theres more to choose from.

This is a slimmer light, not 100% sure if it fits, but it would be similar setup to the CBR mod.

https://www.eaglelights.com/product...integrated-turn-signal?variant=13210855145585

Along with the CLEAR CBR light, I also have this, (clear one) which is going in place of the rear "reflector". (I quote reflector, as I do not have the reflector, just the piece with a zillion holes drilled in it, from past lives, which I recently filled and sanded Smoove).
This one also flashes and has "sequential blinking".

https://www.motodynamic.com/univers...ed-turn-signal-led-tail-light-smoke-lens.html

Do not cheap out on the 10- 20 dollar cheapos. I had an cheap oval Brake/Running LED in place of the reflector. after about a week (maybe less) I noticed about 4-5 of the 40+? LEDs had cut out on me. Still worked , but looked stoopit.


Now I spare no expense on my baby.


T$

Thank You, I'll look into it.

 

[VMAXXIMUM]

Sdt-354 installed a cbr all in one on my bike this spring and I love it. Very bright and visible. Not to mention slims up the tail and looks bad to the bone. I’m having trouble with my phone camera or I’d post some pictures. Getting rid of those big lollipops cleaned up the tail very nicely.

 

[V-Four]

CBR (Clear, NON "smoked").



Please pay no mind to the mess of a floor.. just finished all the new REAR wiring, and there is stuff everywhere..






T$

 

[one2dmax]

I have a LOT of variations available but by far the cleanest one (and brightest) is the reflector conversion. Looks stock blah until you turn it on! I even have billet plates with the recess cut in or flat if you wanted to mount something yourself there.

 

[tjchung65]

That reflector conversion looks interesting!
So I could just disconnect the stock brake light and plug this in?

 

[one2dmax]

That reflector conversion looks interesting!
So I could just disconnect the stock brake light and plug this in?

This can either be added in conjunction or to replace the stock light. Then remove all of the stock crap and move the license plate either up to the fender or a side mounted plate.

 

[Ross L]

Here’s something I’ve never seen done. Previous owner gets all credit. He integrated blinkers and brake light into stock grab rail. Unfortunately I added a back rest and had to remove it.

 

[tjchung65]

Sean. I can't seem to find that reflector conversion on your website.

 

[02GF74]

I take it the conversion replaces the rear shiny plate by LEDs so is not acting as a reflector?

Obviously different laws in US but over in the UK that would be MOT fail.

 

[one2dmax]

Sean. I can't seem to find that reflector conversion on your website.

email me at [email protected]

 

[BHZ]

CBR (Clear, NON "smoked").



Please pay no mind to the mess of a floor.. just finished all the new REAR wiring, and there is stuff everywhere..


View attachment 78905



T$

I'd like to see all the lights working