Luv truck glamor shots.lol
- Thread starter CaptainKyle
- Start date
Help Support VMAX Forum:
Looking good Kyle. It must be a hoot to drive.
Smithjs35
Well-Known Member
This was actually my first vehicle. Great memories, that truck was awesome, floated across a creek bed with it.
Man you sure build some Cleeean machines! How bout a sound clip of that idle.
We were lookin at your pics and realized that Luv is about identical body lines to my dads old yellow Isuzu. His was a long bed 4 cyl. diesel(non turbo) pick-up.
I've got a friend with an Isuzu Hombre, all stock 4x4 pick-up. Under the hood is all chevy, a big V6, like it was an S10 factory clone. Strange....
Parminio
Well-Known Member
I remember watching the build on that thing. It really did turn out nice.
![JOYROOM Motorcycle Phone Mount, [1s Auto Lock][100mph Military Anti-Shake] Bike Phone Holder for Bicycle, [10s Quick Install] Handlebar Phone Mount, Compatible with iPhone, Samsung, All Cell Phone](https://m.media-amazon.com/images/I/5113ZNM8R8L._SL500_.jpg)
![Bovemanx Motorcycle Phone Mount Holder, [150mph Wind Anti-Shake][7.2inch Big Phone Friendly] Bike Phone Holder, Motorcycle Handlebar Cell Phone Clamp, Compatible with iPhone 16 Pro Max Smartphones](https://m.media-amazon.com/images/I/51F+1sontPL._SL500_.jpg)
![Bike Phone Mount Holder, [Camera Friendly] Motorcycle Phone Mount for Electric Scooter, Mountain, Dirt Bike and Motorcycle - 360° Rotate Suitable for iPhone & Android Smartphones from 4.5-7.0 inches](https://m.media-amazon.com/images/I/51ZirRrsA+L._SL500_.jpg)
Chevy had a financial interest in Isuzu. There were a number of re-badged cars sold here as Chevys. The LUV pick up was just one of them. The Chevy Geo's were Isuzus. A family member had a Geo Storm, it got great gas mileage.
Ford had a similar arrangement with Mazda. The Ford Courier was a Mazda pick up. The swap of a small-block Ford V8 into those was another popular mod. I knew a local mechanic who had an early 1970's Mazda pick up, he swapped a Mazda rotary into it, and that was fast! It had the rotary buzzzz sound, which would wind higher and higher, and that little truck embarrassed many a local Camaro and Mustang. Last I saw it, he was at a Ft. Lauderdale Caddy/Chevy/GMC dealership. I first met him when he was at a so. FL Yamaha dealership.
The Mazda rotary-engined racers were popular in IMSA in the 1980's. There was no doubt about which cars passing were rotaries! The Spice chassis was a popular IMSA platform for the rotary-engine Mazda powerplants.
There is a British company now building a rotary track bike, but it's well over $100K. The principal was previously involved with the Norton Rotary bikes. Norton had both air-cooled and water-cooled rotary-engined bikes, their race-only rotaries were successful in the late 1980's-early 1990's.
Crighton CR700W motorcycle brings the rotary engine back into production (autoblog.com)
Ford had a similar arrangement with Mazda. The Ford Courier was a Mazda pick up. The swap of a small-block Ford V8 into those was another popular mod. I knew a local mechanic who had an early 1970's Mazda pick up, he swapped a Mazda rotary into it, and that was fast! It had the rotary buzzzz sound, which would wind higher and higher, and that little truck embarrassed many a local Camaro and Mustang. Last I saw it, he was at a Ft. Lauderdale Caddy/Chevy/GMC dealership. I first met him when he was at a so. FL Yamaha dealership.
The Mazda rotary-engined racers were popular in IMSA in the 1980's. There was no doubt about which cars passing were rotaries! The Spice chassis was a popular IMSA platform for the rotary-engine Mazda powerplants.
There is a British company now building a rotary track bike, but it's well over $100K. The principal was previously involved with the Norton Rotary bikes. Norton had both air-cooled and water-cooled rotary-engined bikes, their race-only rotaries were successful in the late 1980's-early 1990's.
Crighton CR700W motorcycle brings the rotary engine back into production (autoblog.com)
Last edited:
Well allrighty then! She does sound Healthy! We saw that VMOA cup there on the console too. I bet that little pick-up gets the "Wait Whaaat" responses when you roll by.
desert_max
Well-Known Member
Dang it Kyle. I was trying to do some leaf peeping but some old white truck was in the way…
Filmed in NC and TN
That LUV is sittin' pretty for haulin' some mountain dew. Sounds great.
If you’re taking requests Kyle I’d like my sound clip after you push the smokescreen pedal to the floor. Lol
Poor motor needs a little help right now . I just need to get caught up on work so I can do it. I have a new much bigger cam laying here along with new pistons and rings and torque convertor among other things .
The short wheelbase on the truck and the power the SBC makes reminds me of the Cheetah. The seating position in relation to the rear axle is similar too.
Note the staggered wheels, the Torq-Thrust front wheels and the 5-oval hole US Mags on the rear. I have a pair of 5 X 4-3/4" X 8-1/2" GM-size aluminum wheels if anyone has a project and is looking for some vintage wheels. They fit old Camaros and Firebirds to 1981, at least.
Note the staggered wheels, the Torq-Thrust front wheels and the 5-oval hole US Mags on the rear. I have a pair of 5 X 4-3/4" X 8-1/2" GM-size aluminum wheels if anyone has a project and is looking for some vintage wheels. They fit old Camaros and Firebirds to 1981, at least.
Last edited:
desert_max
Well-Known Member
I’m glad you said something. I thought it sounded pretty noisy up there. Good to hear you’re on top of it.
It is not knocking or anything even though it does kind of sound like it in the video. The rings are shot and it is using oil. It still gets up and goes but not quite like it should. It will be much better and faster as soon as I can get to it. I have this cam for it but am running 1.6 rockers instead of 1.5 so it will bump it up a bit.
Attachments
Parminio
Well-Known Member
I have a set of Cam Dynamics billet aluminum 1.5 roller rockers that I bought for my Chevelle about 30 years ago. Never installed them. The original packaging got so torn up I chunked it and put them in an old first aid kit box. Still have them to this day.
My buddy might be interested in them . We are putting my old cam ,heads ,intake and convertor in his truck. I am keeping my 1.6 rockers
Harvey Crane of Crane Cams was someone whom I knew. One of his machinists opened his own business and that's who's done most of my machine work, over the years. He's 'old-school,' no CNC. His #1 bread & butter is ocean racers and Porsches. They pay, they just want it done properly, and on-time.
