New Dyna3000 box!?

[thor_eyerdhal]

A buddy of the french forum recently bought a Dyna3000 CDI box for a 96 max.
It is a programmable one with USB port!

Do you have heard of this new CDI box?

The doc in the box is a piece of **** with no usefull technical detail...

 

[[email protected]]

No. It has dip switches to make changes.

 

[DMAN999]

The Dip Switch settings are shown here:
http://www.dynaonline.com/skins/downloads/instruct/D3K7-6.pdf

 

[thor_eyerdhal]

This link is not for this new product, unfortunately there is no online doc for it...
No dipswitches anymore, you can tune the curve with a laptop PC, but no info on Dynatek website!!

 

[dingy]

I still have several fully programmable new Ignitech TCI available.

I can also supply a cable & programing to allow the VBoost unit to be set to custom opening specs.

Programing is done via a laptop with a usb/com cable.

Rev limiter, shift light, launch light, fuel pump control, nitrous retard are some of the other features that can be utilized with this TCI.

Gary

 

[thor_eyerdhal]

I was talking about new fully programmable DYNA 3000, not Ignitech...

Visibly no one knows, Dynateck advertising an tech divisions are very very bad!

 

[timscues]

I heard they are still having problems or bugs with it

 

[one2dmax]

I sell both but haven't had many troubles with the dyna units in a few years. Not enough time on the igni units to know durability yet (no failures yet either that I am aware of).

 

[Rusty McNeil]

This came up in another thread a while back. Regarding Dyna 3000 that's actually laptop programmable.
Their website says nothing about it. Another member claimed he had one too....

 

[Sweetwilliebrownjr]

The one I ordered a couple weeks back is also programmable by laptop. No dip switches.

 

[Rusty McNeil]

The one I ordered a couple weeks back is also programmable by laptop. No dip switches.

Was it still about the same price as the old style.
I would love to see the cut sheet, installation or users manual in this.
Link perhaps?

Still weird that Dyna doesn't claim them?

 

[dannymax]

There is also one for the analog bikes that is in development, I did some minor testing on a prototype unit that PCW sent me. I WILL have one of these when they hit the market....they are very sweet!! unk:

 

[Sweetwilliebrownjr]

Was it still about the same price as the old style.
I would love to see the cut sheet, installation or users manual in this.
Link perhaps?

Still weird that Dyna doesn't claim them?

I paid $240 for it on eBay new. The users manual was two pieces of paper stapled together. Not impressive, but fairly simple. Once youve installed it, You go to the website to download the software, and go from there.

 

[mckzx9]

Well I have an older one not installed NIB if anyone wants to trade the newer version. Someone that may not be good with computers. just an offer. I plan on installing mine in the next 2 weeks or this first 2 rainy days in a row

 

[Rusty McNeil]

I paid $240 for it on eBay new. The users manual was two pieces of paper stapled together. Not impressive, but fairly simple. Once youve installed it, You go to the website to download the software, and go from there.

Is there a part number needed to get the right software?

 

[Sweetwilliebrownjr]

Is there a part number needed to get the right software?

The instruction sheet tells you where to download it. To be honest, I was about a 12-pack in when I installed it, so details are a bit fuzzy. I think they have a downloads section on the site.

 

[rynoman]

I still have several fully programmable new Ignitech TCI available.

I can also supply a cable & programing to allow the VBoost unit to be set to custom opening specs.

Programing is done via a laptop with a usb/com cable.

Rev limiter, shift light, launch light, fuel pump control, nitrous retard are some of the other features that can be utilized with this TCI.

Gary

Gary,
do you still have these units and how much do they cost?
Thanks,
Ryan

 

[thor_eyerdhal]

The instruction sheet tells you where to download it. To be honest, I was about a 12-pack in when I installed it, so details are a bit fuzzy. I think they have a downloads section on the site.

Yes we can download the software here :http://www.dynaonline.com/skins/downloads/

The new instruction manual is zipped in the package!

Look at the picture, You can customise all parameters and new functions :
-Start retard
-2 steps input
-ignition retard
-data logging

I want it :th_image003:

 

[sdt354]

The Ignatech does everything I ever wanted, plus. I recomment you buy it from Gary or Sean, as a different MAP sensor is needed.
Steve-o

 

[ragdog2011]

where to buy the new Dyna 3000?