Not sure where these go

[Pissed off Veteran]

Not really sure where these go. Is it number 9 on schematic. I bought number 8 on schematic because it was missing when I removed stator and figured I better buy 9 and 15 also . When I removed generator case things kinda fell into case and 9 was one of them.Top one is the old.

 

[CaptainKyle]

9 goes on after the stator cover with the small lip facing in.

 

[Pissed off Veteran]

Thanks Cap, Next question, how and where to install shaft, part#15?

 

[Pissed off Veteran]

8, 9 and 15 were not installed on stator when I disassemble.

 

[CaptainKyle]

Thanks Cap, Next question, how and where to install shaft, part#15?

15 sticks in the bolt that holds the flywheel on .

 

[Pissed off Veteran]

Alright so 9 goes on top of 8 and Lays there like in picture, nothing holding it in during installation?

 

[CaptainKyle]

Alright so 9 goes on top of 8 and Lays there like in picture, nothing holding it in during installation?

Just the 3 bolts which I usually replace with Allen heads the stock yamaha screwes suck. If you want pictures of stuff I can take them later when I am home.

 

[Pissed off Veteran]

Yes pictures, Please. Thank you, I know the 3 screws, just want to clarify everything before I start attaching stator and pick up coils. who ever had the bike before me had the plate#9 on one of the gears there in the case. What size allen heads you order?

 

[one2dmax]

Stator cooling parts

 

[Pissed off Veteran]

Generator cover holds the plate in place, I see now.