Radley

[Bill Seward]

Here's the pics of the coil bracket mod to mount R/R where the coils used to live.

All you want to have left is a flat area to zip tie the regulator to. Look at mine. The fuse and solenoid tuck in to the left..

 

[steamer97]

thx Bill I have recently went COPS and haven't been thinking as you have. A great mod that I will do this winter, had this reg. sitting here for over a year!

 

[GlennsVmax]

I have several cracked coils. Can you tell me where you purchased your COPs and approx. price?

Thanks,
Glenn

 

[steamer97]

I got mine from Jon Harris, he is a member on here. gsxr123007 is his e-bay name. The following is his e bay ad. He used to offer slightly lower price for forum members. https://www.ebay.com/itm/1985-2007-...ash=item2f0f4d93f2:g:dwMAAOSwuAVWwqjT&vxp=mtr

Sean Morley (Morley's muscle) "[email protected]" sells them also. his info is on the forum's vendor list, just e mail him to get current price.

The cops sets are "Plug and play"

By the way, you can electrically check the coils to see if they are really bad. Cracking is possibly only cosmetic and you may caulk the cracks shut if you find that electrically they are ok. In my case i had thirty years of corrosion on the coil end of the plug wires. You can just snip 1/4" inch off to reveal clean wire and prob clear this up. I only did my cops because working on the front coils is such a ****** and I didn't want to remove the front wires and snip them because of the work getting to them. lots of info on the forum on how to check coils.

 

[radley]

Thanks BIll.. going to put bracket into surgery now. i'll post progress back on the performing like 500cc thread.

Here's the pics of the coil bracket mod to mount R/R where the coils used to live.

All you want to have left is a flat area to zip tie the regulator to. Look at mine. The fuse and solenoid tuck in to the left..