Replacement Turn Signals???

[MikeUSMC1371]

Ok, so I've scoured every parts list, and I've done my due-diligence to find an answer and have failed......I want to slim down the turn signals, but it seems any aftermarket options I look at would have too small of a stud compared to the OEM turn signal stud. Does anybody have a list of turn signal options that will work or an idea of how to make aftermarket signals fit? I was particularly looking at the Kuraykyn Attos or anything of similar size. Thanks in advance for any help

 

[[email protected]]

Too small in what way?
If you're saying diameter, it doesn't really matter. A short piece of rubber hose or tubing slid over the stud will fix that and help prevent vibrations too.

 

[one2dmax]

Gen 1? I have a lot of options but most like the aluminum ones we sell (multiple lens and housing color/finish options)

 

[Fire-medic]

The aluminum ones are aesthetically the best match, with the aluminum headlight carrier, the aluminum handlebar cap, the aluminum brake splitter/cover, etc. I've seen some lamps about 1/4" dia. which don't give anyone much to see, I would get something at-least visible, and bright. They are running/turn indicators, after-all.

 

[gentsvmax]

Radiantz and Custom Dynamics are just a few that come to mind, a search worded"led turn signals for motorcycles" will show endless suppliers. I used Radiantz LED turn/run/blink with a multi flash module, very bright in direct sun light, the bike's lit up like a christmas tree front and back. Though the back attachment is a very custom design they as well as the fronts are the same lights used for the stock locations on earlier versions of my bike. Maybe 16 bucks front and back,
free shipping too.

 

[user 16790]

some of the lesser known models of japanese bikes have neat and small indicators if you want something that is a quality build, personally I like the alloy indicators fitted as standard to the HONDA VRX400,
I've seen so many aftermarket indicators either cheap or expensive corrode, pit up or fall apart, so I always look for reasonable standard items where possible

 

[gentsvmax]

some of the lesser known models of japanese bikes have neat and small indicators if you want something that is a quality build, personally I like the alloy indicators fitted as standard to the HONDA VRX400,
I've seen so many aftermarket indicators either cheap or expensive corrode, pit up or fall apart, so I always look for reasonable standard items where possible

I agree, for what I got in "bright and cool" the stalks are a rubber to flared steel snug fit.
The lights won't take a direct hit, bump or tap LOL...But I think they fit the look I want.
I shot two more pics for the question of mounting. I'd say it take's a little creativity for some
custom application of the aftermarket lights etc.

 

[MAXMS]

Found these and they have not failed me once. Front and back.

 

[gentsvmax]

I like em, neat and clean. incandescent though.

 

[one2dmax]

Varieties of ones we've made

 

[gentsvmax]

I'll take a set! Need red and yellow run/brake/turn's rear and yellow for the front
LED's.

 

[2017VMax]

I bought the corbin fender eliminater. When installed with stock turn signals it cracked. They honored the warranty. I found flush mount smoked signals and love them. This is the only image I have atm.
Amazon.com
Flat Mount LED Dual Ciruit Running + Turn Signal Lights for 2008-2016 Yamaha YZF R6 https://www.amazon.com/dp/B00B7ADIEC/ref=cm_sw_r_other_apa_i_yVxvDbWFNTBE0 for the front and⁸
Amazon.com
2 PCS Amber LED Turn Signal Indicator Light Lamp Flush Mount For Yamaha YZF R1 R6 R6S Smoked Lens https://www.amazon.com/dp/B07BL2QLBS/ref=cm_sw_r_other_apa_i_8YxvDbM6QND4M for the rear.

 

[one2dmax]

I'll take a set! Need red and yellow run/brake/turn's rear and yellow for the front
LED's.

Email me if I can help you.

 

[gentsvmax]

Email me if I can help you.

Ok will do, going to your site now.

 

[one2dmax]

Site is ****. Email me lol! [email protected]

 

[1badmax]

Gen 1? I have a lot of options but most like the aluminum ones we sell (multiple lens and housing color/finish options)

Do you have any options for a Gen 2 Sean? Looking for the smallest LED that is preferably plug and play. Someone had mentioned aftermarkets for MT09 & 10. Thx!

 

[D Larson]

Do you have any options for a Gen 2 Sean? Looking for the smallest LED that is preferably plug and play. Someone had mentioned aftermarkets for MT09 & 10. Thx!

In the spirit of the halo kits that Mike Kemp has built for the front, I am working on a low profile solution for the rear of the Gen2. I have a button style indicator that I will fit to a Yamaha stalk. I need to get some black acrylic machined as the interface between the two pieces. Also the wiring length is way too short.

I will post some more pictures when I get it done.

 

[1badmax]

I have the integrated LED tail light that I got from Sean and am happy with it. Since I do not ride at night I didn't know that I really needed the Halo's even though I really like the looks but I am focused on doing something to get rid on the big signals on the forks for now. Thx!

 

[one2dmax]

I have stalk eliminator kits but don't have LED sets that I have tried to get for the fronts (rears we can do the integrated as mentioned).

 

[1badmax]

I have stalk eliminator kits but don't have LED sets that I have tried to get for the fronts (rears we can do the integrated as mentioned).

Very well, LED mostly so I can go smaller.
Thanks Sean!