Show your windshield!

[VegasVMax]

What mounting brackets are you guys with the Memphis shades shields using? According to their web site, nothing they sell will fit a Vmax.....:confused2:

 

[dannymax]

I used fork mounted ones from Memphis Shades, Bob made his own...these are what I had but just sold them on fleabay~~

 

[06VMAXIMUS]

What mounting brackets are you guys with the Memphis shades shields using? According to their web site, nothing they sell will fit a Vmax.....:confused2:

The windshield comes with universal mounting brackets that work fine with any 7/8" dia. handle bar. It just takes some time to get it adjusted to your preferred location (height, angle, ect.) The turn signals will need to be relocated.

 

[dannymax]

The windshield comes with universal mounting brackets that work fine with any 7/8" dia. handle bar. It just takes some time to get it adjusted to your preferred location (height, angle, ect.) The turn signals will need to be relocated.

Agh! I totally missed his question Bob...thanks for the 'bail out'! :worthy:

 

[dannymax]

I'll make it all better....here are the brackets that come with the M/S shield....easy enough to mount, easier with a little help.

 

[VegasVMax]

Thanks guys!

 

[SledHead]

Here is a picture of the Yamaha accessory windshield.

 

[fmcandrew]

Added some PC and spiced up the ordinary...

 

[Miles Long]

5 mm smoke plexiglass, polished stainless steel sheet for trim.
Windshield fabrication is relatively easy, once a proper bending jig is made.

If using kitchen range for heating, don't acknowledge:ummm: any "weird smell" when wife returns home.

Same M.O. if powdercoating.
Cheers!

 

[jagco1]

5 mm smoke plexiglass, polished stainless steel sheet for trim.
Windshield fabrication is relatively easy, once a proper bending jig is made.

If using kitchen range for heating, don't acknowledge:ummm: any "weird smell" when wife returns home.

Same M.O. if powdercoating.
Cheers!

That's cool I like this 1.

I just have the stock vmax 1...

 

[headknocker]

Davesax is right, I do like the Memphis Shades, here is my '86 with the MS Classic Deuce (Douche?:biglaugh it isn't cut up from the bottom tho I used MS signal relocator brackets to lower the signals to the forks.

Then I saw the MRA sheild and liked that one better.

I also run the MRA just like the one Dannymax shows, that is a great choice I love it

 

[one2dmax]

Any better pictures of the fork mounting system. We're trying to figure out the correct mounting stuff needed for the Speed Demon screen. The screen comes without any brackets and there are no universal clamping system for the handlebars. We do see a bracket setup for the fork legs but would love to see what that looks like if anyone has a picture of that.

 

[davesax36]

Hey, MRA guys. Did you get the standard mount or the long mount for your windshield? I think the "long" one is 10" stand-off, but I don't know what the standard one is. I'm thinking the standard would probably work, though.

 

[dannymax]

Didn't know there was a long or short one....I got this, it fits good.


Mounting kit for MRA naked bike windscreens (universal for 1-inch or 7/8-inch diameter bar)

 

[Fastatv]

That's cool I like this 1.

I just have the stock vmax 1...

Hi Jagco, wanted to ask. The windshield in your photo is a Yamaha brand? I had one just like it, damaged it, removed it and looking for an exact replacement. I'll check out Yammie parts at a dealer. Rick

 

[davesax36]

Didn't know there was a long or short one....I got this, it fits good.


Mounting kit for MRA naked bike windscreens (universal for 1-inch or 7/8-inch diameter bar)

that's the regular one, I think. And that's what I needed to know. I'll probably put my national cycles one up for sale. I remember like the mra on my fz1.

Sent from my Galaxy Nexus using Tapatalk

 

[VegasVMax]

Yea, I'm diggin the DIY one too.

 

[jagco1]

Hi Jagco, wanted to ask. The windshield in your photo is a Yamaha brand? I had one just like it, damaged it, removed it and looking for an exact replacement. I'll check out Yammie parts at a dealer. Rick

Yes yamaha brand, I bought around May of this year cost was $95.00 new... on ebay I got lucky, The price was $135.00, I offer him $95.00 and he went for it.

http://www.ebay.com/itm/Yamaha-Inst...Parts_Accessories&hash=item43c29df736&vxp=mtr

 

[Fastatv]

Yes yamaha brand, I bought around May of this year cost was $95.00 new... on ebay I got lucky, The price was $135.00, I offer him $95.00 and he went for it.

http://www.ebay.com/itm/Yamaha-Inst...Parts_Accessories&hash=item43c29df736&vxp=mtr

Thanks! Its a rather small windshield and doesn't do allot but I really like the looks. I will get with my dealer, and grab another. Thanks again! Rick

 

[[email protected]]

Hi Jagco, wanted to ask. The windshield in your photo is a Yamaha brand? I had one just like it, damaged it, removed it and looking for an exact replacement. I'll check out Yammie parts at a dealer. Rick

Not sure what parts you need but, replacement plastic is available and I believe patmax has a frame available.