Side mounted coils

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jun 25, 2023
Messages
55
Reaction score
5
Location
Oklahoma
Has anyone ever mounted the coils on the sides of the engine. I saw a VMAX on utube site called Clubstyle. Nice customized VMAX gen 1. Says it is a 1300. Interesting that she put the coils on the side of the engine and then just runs the plug wire up to the plug on the outside of the bike. Aside from weather and exposure, it does free up room and make maintenance easier. Not sure if I like the look, still thinking on that. But did get me noodling the idea. Has anyone other than this one lady done this or is it purely a one off. Any thoughts on good, bad, indifferent.
 
1691418218377.png

Here it is. It's a different look. Dunno if I'd repeat it. Probably not. It looks like something Wiley Coyote would use to try and catch the Roadrunner, Acme Ignition Coils. I am not a fan of the matte near-total blackout look.

About the coils placement 'freeing up room,' and 'making maintenance easier,' let's look at the first. What are you going to use the room behind the steering head for? Not much there for gained storage which is convenient to access. The coils by the battery, you have to remove that plate anyway to access the battery for removal, but about the only time I access the battery is to replace it every few years. If the coils aren't there, the gained space isn't very-big, and unless you're a Munchkin I don't think a thin nylon windbreaker would fit into the freed-up space from removing the coils. Maybe enough space for a small paperback book?

That owner's ideas have made her bike distinctive, and the R1/R6 front brakes if they have HH composition pads, should aid braking. It's a clean look being mostly matte monochrome, maybe like the 1980's AMG Mercedes-Benz's where everything was painted in the same color.

1691424992001.png
Very Miami Vice!





Here's a factually-challenged 'review' of the VMax from a video following the Clubstyle video. See how many errors about the bike you can find. Did you know the side scoops are 'plastic?' They are, according to the narrator. Another questionable statement: "The only practical thing on this bike is having a helmet lock." Then he immediately mentions the sidestand. Oh well. This bike does not have any utility whatsoever... ." It does, if your idea of 'utility' is hauling ***. In the 22 minute video, after mentioning non-subjects like the blank oval in the faux tank-mounted instruments bezel, he finally does get around to stretching the throttle cables. I'd be more interested if he spent less-time on the aftermarket handlebar-end mirrors, and went to a dragstrip to find-out what this bike's real mission is.

 
Last edited:
Has anyone ever mounted the coils on the sides of the engine. I saw a VMAX on utube site called Clubstyle. Nice customized VMAX gen 1. Says it is a 1300. Interesting that she put the coils on the side of the engine and then just runs the plug wire up to the plug on the outside of the bike. Aside from weather and exposure, it does free up room and make maintenance easier. Not sure if I like the look, still thinking on that. But did get me noodling the idea. Has anyone other than this one lady done this or is it purely a one off. Any thoughts on good, bad, indifferent.
How bout the good ole C.O.P.s.....nuff said
 
Back
Top