Too loud! I know rite?!?!

[KJShover]

looks like the 1.5" baffle to me.
Packing gets old and worn out too. A simple re-packing might do the trick.
Also, keep in mind if you do return to stock pipes, take the carbs back to stock too. A stg 7 with stoke pipes, it isn't going to run right.
+1 on contacting Mark and having him build you a custom can. Keeping the 1.5 baffle or even go with a 2" if the can is a little longer and bigger around, it will quiet you right down.

 

[BLKMAX]

looks like the 1.5" baffle to me.
Packing gets old and worn out too. A simple re-packing might do the trick.
Also, keep in mind if you do return to stock pipes, take the carbs back to stock too. A stg 7 with stoke pipes, it isn't going to run right.
+1 on contacting Mark and having him build you a custom can. Keeping the 1.5 baffle or even go with a 2" if the can is a little longer and bigger around, it will quiet you right down.

+1 Packing is cheap. I'd try that first and see if it works for you.

 

[85vmax]

Your packing looks pretty intact........you might want to buy the neighbors a box of earplugs.
Other than changing the whole system, you may want to do what others suggest....try a different muffler.
I,m afraid though that they all be just as loud since I had the same setup and didn't think it was that loud.
Might be the raspy tone that gets too ya.

 

[Barry barker]

seems like such a waste to get rid of $1000 pipes for something quieter... I'm like a minority in that I don't like loud pipes. Maybe I can get a muffler to go on there....

Your not alone, I like quiet. dont want anyone to know i just buzzed there area!!!

 

[vmaxinID]

That packing you see might just be whats left from the cold end of the pipe. If you pull it out, see if it's all there, and not just a bit at the end.