Valve shims and correct tool?

[steven61467]

I have to adjust my valves with help form a good friend(local shop wants almost $600) could one of you fine ppl direct me to the CORRECT site to buy the shim kit,and CORRECT tool i need.thank you very much

Bikes got 33k mileage,and it seems i am getting blow back into my crank case,oil smells like fuel

 

[gamorg02]

contact sean morley (banner up top) or one2dmax on the site. he loans outa shim kit with tool!

 

[MaxMidnight]

The tool is part no YM-33961.

The shims are sold individually so the best bet is to see which ones are installed, which are out of spec and if any of the other out of spec. shims can be swapped over.

That should help reduce the number you need to buy.
If you have a good relationship with your local Yameringha dealer they may even be prepared to swap shims with you.

 

[mr.maxx]

here is a great chart for referenceunk:

http://www.vmaxforum.net/showthread.php?t=11982&highlight=valve+chart

 

[ninjaneer]

contact sean morley (banner up top) or one2dmax on the site. he loans outa shim kit with tool!

+1. hehehe ya beat me to it

 

[bazwell]

The tool you can get from georgefix on ebay.
The things he sells are usually spot on.

http://www.ebay.com/sch/m.html?_nkw...ax&_ipg=200&_osacat=0&_armrs=1&_ssn=georgefix