Vmax 1700 brakes

[uri gal]

Hello all
I own a 85 vmax with a R1 2003 USD frontend and calipers.
Lately, i got some front master cylinder form vmax1700.
My qestion- it is possible to have a bracket to the R1 2003 frontend to the 6 piston clipers from the 1700?

*i know that i will need new discks 320mm.

 

[one2dmax]

You might see if Dinges has any more of his radial conversion brackets though not sure they will fit that specific front end. You may be better off getting newer R1 front end and then it should fit up. Personally, no real reason to run the 1700 calipers. I'd just get the 6 piston sumitomo's and be done with it (direct bolt on).

 

[uri gal]

Who is dinges ( have a site or email?)

 

[one2dmax]

He goes by Dingy I think on here?

[email protected]

 

[wildweasel_pt]

Hello all
I own a 85 vmax with a R1 2003 USD frontend and calipers.
Lately, i got some brembo front master cylinder form vmax1700.
My qestion- it is possible to have a bracket to the R1 2003 frontend to the 6 piston clipers from the 1700?

*i know that i will need new discks 320mm.

You have the last year of axial brakes setup with 100mm spacing. You might get away if dingy has some spares but I think his setup was to use with 298mm discs though you can use spacers with longer bolts to adapt a 310 or 320mm. For your information until 2003 r1 uses 298mm disks 2004/06 it's 320mm with 5 bolts and 2007 and above its 310mm with 5 bolts. You can find a 320mm 6x150 that fits stock wheel if you look for r7 brakes online or FJR1300 some models. Like Sean mentioned if dingy doesn't have them you have a big ordeal right there. Be careful when matching masters and calipers as you may have a bad surprise and they don't go together. Do your home work before hand

Sent from my SM-G930F using Tapatalk

 

[uri gal]

thank you