switch

Had a funny thing happen to me over the weekend. I was out on some erands and came out to start my bike. It started but ran like crap and both the red Fuel and Oil telltales were lit. Every time I tried to give it gas it just sputtered and wanted to stall. I shut it off and re-started, same...

The previous owner has grounded the wire going to the neutral switch so that the neutral switch stays on all the time. This seems to override all the other safety switches also. What is involved in replacing the neutral switch? I was hoping that I didn't have to take the cover off behind the...

Looking for right switch handle with the paint and the letters in good condition. It's the covers that looking for. But I can't be choose. Is there anyone out there please let me now.

Ok...did a long search thru the million threads on brake/clutches without finding the answer I was looking for. I bought a Nissin Clutch master with the switch. The switch has 3 small hookups(made orig for a connector). Can this somehow be wired to the VMAX clutch wires? If not, is a banjo...

First things first, gotta thank Ost85vmax for sending me this switch setup... I really appreciate it bud!!:clapping: The first thing I did was to get the sensors figured out and I gotta also thank NHVmaxpower for his review and install because it saved me some time because he gave the tip about...

Yes, I'm crazy. Wanted the utility of cooling the engine on demand, without having to remember to turn fan off, and without jacking with the Outlaw Sensor, rumored to have issues. So.... I went wild. In process of uploading images. Please wait.

Short question: My ignition switch has an on/off and "P" position. In order to turn it to the P position, you have to push the key in and then rotate it. I could not find anything on the P position. What does it do? Long question. Well, the question is actually...WTF?? I rode my 88 Vmax a...

Does anyone know which of the three pins I need to attach the vmax clutch wires to? Sent from my Galaxy Nexus using Tapatalk 2

Instead of a manual override fan switch, they claim a different engineer sensor to cycle the fan at lower temps. Anyone try this? http://vmaxoutlaw.com/merchandise/performance.htm http://vmaxoutlaw.com/merchandise/performance.htm

Mine needed adjusting. I had to depress the rear brake too far, before the plunger switch would activate. In other words, under light rear braking, my rear light may not have been activating. Here is the image. The adjustment nut tightens clockwise. Just a safety heads up!!!

has anyone connected a toggle switch to there vboost to have it open all the time instead of disconnecting the plug under the scoop?

Since it is too brisk to ride, I am wondering on how to make my day useful. Along with installing a manual fan switch I decided to install a 12 outlet. Since we depend on our phones/smart phones, what are the chances of being out and then phone dying? I have been there with the car, but out...

Many years ago, I had bought one of Dale Walker's Vboost override switch kits. This was the "original" type Vboost switch which allows opening the Vboost at anytime you desired, or flip back to stock mode. I had removed it when I did the Stage-7 & Tourmaster. Then a few years later, sold that...

I just found out today that if your kickstand is out the engine will die if put in to gear. I'm sure most of you know this but I didn't and couldn't figure it out until I was going to park it and call the wife for a ride so I could get my trailer. Anyway, if you didn't know now you do.

Ok so I have this weird problem: with the motor running, when I hit the killswitch, it keeps on running, usually for a number of seconds, until it eventually cuts off. :confused2: I have already dismantled the kill and reserve switches and given them a good cleanup, 1500 sandpaper on the...

Looks like a small aftermarket switch, on the left side, just above the left scoop. I haven't messed with it because I have no idea what it is for. I've looked on here to see if on any other bikes, and didn't see any. Any ideas what it could be?

Has anybody swapped in a USD front end, and used the switch controls from the front end they used? I used a set of 2007 R1 forks, and was contemplating using the same switch controls from the R1. Turn signals, on/off, etc. The only thing I see of an issue, is having to remount the fuel reserve...

Did all first gen's come with the side stand kill switch:ummm: Thanks......Rusty:biglaugh:

Hello, I have some problems with my reserve feul tank. If I am out of feul and put the switch to reserve it does not work. I allread clean the swich and check the wires. If a strat my Vmax the reserve light come up for a second. But the light does not work when I am out of fuel. Therefore I...

I bought a radiator fan over ride switch last winter on Ebay, have the switch but can't find the insulation instructions. Nor can I find the vendor or anyone selling them on Ebay. Any help? Thanks.