tube

Does anyone have a picture that shows vent tube routing from the carbs to the bracket on the side of the airbox where they slip on? Do they go in between the frame and the airbox or do they go on the outside of the frame? I have a 1995 airbox that I am putting on my 1985 vmax. No matter how I...

I've been curious about what the inside of the '06 fork tube looks like....there's some stuff in there that appears to be non-removable but will spin smoothly inside the tube when rotated. So I cut the bottom of the tube off and split it in half....here's what it looks like. The white piece...

Will the o rings around the tube cause a problem with a 4 k stumble when slowly rolling on the throttle, where are the emulsion tubes located in the carb ?

I have been wanting to lower the front end of my '92 Vmax by lowering the forks in the trees. I've read here how and why to do it but I quickly found out that there is a tube that connects across both fork tubes to equalize the air pressure. I also have a '96 (not currently driving) that doesn't...

Hello My fork seals have been leaking forever. Now its time to change them. On the 85 Vmax there is a a tube connecting both fork tube just below the top triple. I pulled the snap rings from both tubes, but the collars that hold the tube will not budge. But now will spin. I don't want to break...

I was updating the springs on my 94 vmax and noticed some long grooves on the inner fork tube on my right fork (which was leaking). You can just feel them if you run your fingernail across them. Does anyone know if polishing will work well enough to smooth them out to keep the seal or do I need...

So... here the situation. I blew my clutch(no exaggeration, it exploded two plates) yesterday. when it let go, i overrevved the bike and it puked about a half quart from the breather. replaced the clutch, filled it up, took it out and broke the cluthc in. alls well until i layed into it and...

i ordered the python motorsports drag bars and it said they included grips...so i removed my old grips and throttle tube and discarded it...the throttle tube and grip are a complete assembly on the vmax, so i assumed the grips that come from python would include a new tube or a disclaimer saying...

I needed a tire repair today, my ME880 rear had a nail on it, and still has several thousand miles left on it. Oddly, the place I have gone for small repairs over the years now advocates installing a tube in the tire rather than using a plug. I've had a long history with them, so I let them...

I have a '99. I'm doing progressive springs and oil & dust seals. Everything came apart fine but............in the inner fork tube, just above the Oil lock piece there is some sort of retaining ring. It doesn't seem to be mentioned in the on-line repair manual. I noticed 2 or 3 small pieces...

Hello All My speedometer stopped working, so after checking with a drill that the cable still turned the speedo I had to pull the front tire and check the gear unit assembly. It had jumped off the meter clutch. Got it all back together and now it works :eusa_dance: Anyways I digress, as I was...