brake

Have a 2005, all stock brakes. Looking for the ebc hh brake pad number for the front brake pads and the rear brake pads. If you know the ebc part no. for front and back let me know please. I found ebc-fa88hh, but site says 85-92 front, 93-07 rear. Does not say 93-07 for front. So it is...

So I was having an issue w/ the amount of travel on the front brakes of my 91 Vmax. The rear brake seemed to be ok. Well, I attempted to bleed the front brakes w/ no success at getting any better "feel" from them. No better, no worse. I then attempted to bleed the rear, which, for some reason...

hy, :bang head:appologise the language barrier:bang head: Recently brouht 1986 Royal Venture in stock configuration = -The front brake master cylinder (handle one) activate front wheel right calliper. -The front wheel left calliper is activated by the rear master cylinder (foot-lever one)...

Well i got a Nissin master in from kyle. only one problem it doesnt have the switch for brake light! can someone post a picture of theres? i cant seem to find anything on the internet i need to get one

r1 or hayabusa? Do you rtain stock master cylinders or not in either case?

OK, new project 94 has a "sticky" front brake, although that's probably not a good term for what it's doing. Hard to describe, but the action of the lever is not smooth, you can pull it in slowly and nothing happens, then all of a sudden, about halfway through it's lever travel, it will grab...

Anyone have any suggestions on where to get some nice fancy looking brake and clutch levers for the Gen 1 Vmax?? Good quality as well? I did a few searches but only came up with Gen 2 stuff.... Or stuff from China that had to be purchased in large bulk quantities....

Let me know what you think. They are lighter, strong and more solid ( Less flex ) then the original factory stock part. It bolts directly in place of the original factory part, the same as the factory. I ve seen others that only bolt on from one side. Factory arm 10.6 oz's Aluminum...

Having issues with rear brake light switch. Thought it just needed a adjustment but it's shorting out. Starts sparking when you turn the key on. Wondering if it has something to do with me getting my foot peg mounts chromed ? I've had adjustment issues before but they never shorted the switch...

I have an 89 & the front brake master just went out. I really don't want to use another max master. Anyone know which master from other bikes will fit the max? Will my factory brake switch hook up or will i have to change that also? Thx.

i have a 95 max i got in a accident and the brake master is leaking, i found one online for decent but its off a 86 model, anyone know if this will work i know most parts are interchangable but ive also seen some year seperations for other parts

An enormous THANK YOU to Sean and Garrett for helping me source the calipers, pads and Arashi rotors for this little gem. -

Another interesting dilemma: My tail light(s) don't work. The brake lights work fine, though. I have checked the bulbs, and both filaments appear to be in good shape. I checked the fuses, all look normal. I checked the connections under the rear seat, all were set firmly. I might buy 2...

I am looking for a reasonable upgrade from stock. My rotors are warped and I need head bearings also. What is the most economical way. The bike is basically stock with a modified Morley stage 7 kit. Any ideas?:ummm::ummm:

Hey guys I have an 86 vmax I out together a kick ass kit using 6 piston calipers morleys brackets and ceramic pads here's a link. I need money to rebuild my engine in my car. OK, to clarify what you have. $60 Adapters/Bolts to mount Hayabusa 6 Piston Calipers on 85-92 Vmax Forks. This requires...

Gonna explain this best i can, the brake lever when you pull it slow it is sticky and sqeaky but if you pull it hard like for a hard stop its fine, the slower you pull the worse it is, and the noise seems to come from under the resivior where the plunger is, also when i open the cover brake...

I've never done anything special when I've done previous brake jobs, But is there a "best way" to bed them?:ummm:

Should i use disc brake quiet on dbl h pad's.

I will try to explain this issue I am having in the easiest way possible... I have a 99 Vmax, I replaced the rear Brake light with an LED light from http://www.motorcyclemods.com/ The light works great! it has a 3 wire hook up 1 ground, 1 brake and 1 wire for tail lights, now here comes the...

Hi Guys Just bought morleys muscle brackets for my 86 vmax. Found busa calipers, and r1 rotors too Will post pics when the conversion is done. Cant wait !