brake

I know this thread already exists but I could not find it. Does a set of these really cost $250? Those who have upgraded, has it made a great improvement in braking ability? I am looking at the UFO set. http://planetvmax.com/85-07vmax/brakes/#!/~/product/category=3613433&id=15357987...

Hey guys..:eusa_dance: One of my Vmax's front brakes wont brake hard.. It worked just fine last season considering stock Vmax front brakes suck anyway.. But now its super mushy and barely brakes as the lever bottoms out. The reservoir is full. I went through this with a clutch master I...

Hi! After getting my bike out of winter storage the bike began to leak small amounts(drops) of brake fluid at the scoops. I know this because its eating my paint! Anyone know how to fix this problem?

I'm looking to replace my pads and was looking at eBay for a set. I've had good luck with the pads that USA Motorcycles sells on my wing but found these and was wondering if anybody has tried...

Hey guys, Spring is upon us here in Canada and I had my bike outside for most of the winter (but it was winterized and covered). The problem is the rear tire/disc ended up not being completely covered and there is now light rust covering the rear disc. Should I take some steel wool and...

Hello guy i was on taking the cush drive and brake disc off my resent divvy wheel and all the bolts have snapped except one any ideas on how to get them out ?

Anyone have any ideas where I might be able to purchase different colored anodized clutch and brake levers? All I've been running across are ones made for the 2nd Gen Max. Thanks.

I found this on amazon.com brake fluid dot 5 price for 32oz is $13.85 the lowest price I could find. Sometimes I have to bleed the brakes and clutch at master cylinder man some link on the scoops through rag and man lift a drip run off like in the paint had to buff it out. So I have been using...

Hi everyone: I hope you all are doing well and staying warm. I've got a question regarding a brake master cylinder I found in my parts pile: It's got one of those remote round brake fluid holders that attaches to the m/c via a tube. On the m/c itself, the risen text reads "Nissin" on one...

I found a brake light modulator on eBay(http://www.ebay.com/itm/Motorcycle-Brake-light-modulator-4xfast-4xslow-steady-Up-to-300-LEDs-/261034810174?pt=Motorcycles_Parts_Accessories&hash=item3cc6e31b3e&vxp=mtr), ordered and installed it today along with a set of LED tail light bulbs that I picked...

Hi All, I have a 88 Vmax, i have a very strange problem with the brake light wire. It had got layed down previously and upon putting the bike back together from mostly minor damage I got new LED dual running and Brake lights. But when i hook them up which i have done on a few other bike with...

Both of my lights work but not when I brake. any idea what I should look for to fix this?

OK, I know this front brake reservoir is made by Nissin and it has a 14 stamped on it. However I can not find a similar one in any forum pic's. It is working perfectly but I want to change the cover to chrome or polished aluminum. The other side(clutch) looks like stock Yamaha and already has a...

Yesterday riding down a canyon road I felt the rear brake fade, then gone. Peddle would just bottom out, like no hydraulic pressure, and no rear brake at all. After coming out of that canyon, about 15 miles of fairly straight riding, 65 MPH, no use of the brakes. Down into the next...

We are proud to announce some new adapters are coming soon. Of course we have our ever popular Hayabusa upgrades for the early Vmax's (85-92) and some other adapters. Now we will be able to offer the absolute best possible braking for ALL year models. The new adapters (listed below) were...

Anyone know the size of a 94 FZR1000 EXUP brake master? Reason I ask is because I'm running 94 FZR 6 POTS with a Nissin master. Now it takes a lot of travel to get the good brake pressure I feel it could be better. I thought maybe my clutch and brake nissin masters were ZX7R's so I ordered...

I just ordered some pads for the front and rear. When I ordered them they had different part numbers for F&R but I just got them in the mail and they are all the same #'s

Other than sliding pins what would case brake pressure not to release in front brakes? I have FZR 6 pots with Nissin master... Good thing I was only doing 30 because my front brakes didn't release after tapping brake... I can't duplicate it. It sucked getting it off the road it wasn't fun...

Drill one hole for the wire to go thru and one wire for ground to the bolt and the other bolt holes line up and then tie ground wire into your bike ground wire and the wire from the light to you yellow factory brake wire and your done.. 30 minutes and $9 = added safety ... I Hope:eusa_dance:

My daughter bought me brake pads for my bike. I've been riding without front brakes since I had a leak from my reservoir so I had Sean rebuild it when I sent it to him cause the screw hole was stripped. So I put the pads on and put fluid in and I'm trying to bleed it and it just WON'T pump up! I...