cover

anyone know where i can get a decent seat cover...i wanna re do both the driver and passenger seat.

Have enough of these left over to do 4 bikes. 100 was the min. purchase. Installed on my bike and sent 1 set out already. If you like black, here they are FREE. And they engage all the threads on the carb, unlike the ones I removed. Just PM your address and I'll send them.

can't find vboost servo. My bolts are pretty stripped and are also pretty tight. Anyone have some suggestions to removing these and once they are removed a good source for Allen type bolts to replace these? Does anti-seize help this unstick? Second question, to stick the Vboost on...

Does anyone have a good source for the clutch and brake master cylinder cover screws? Mine are all chewed up and I need to replace them before I have to easy-out them. Surely there are some stainless ones out there...?

I have a little bit of oil leaking from the front cylinder's head cover gasket (both sides, just the front of the gasket nearest front tire). As seen in the attachment, right at the #28 and again on the opposite side of the engine. Initial speculation from dealer is $400 to replace gasket. Do...

I decided to do a little painting tonight. I was going to go with a chrome paint for a shiny'r silver and paint the lower part gloss black. Well, at the store today I saw a Nickel Satin and thought it might look really cool. Well, it does and now I don't think I will paint the bottom black. Only...

Anyone on this forum use one on a regular basis? What are the advantages/disadvantages? I was just given a brand new sheepskin mattress cover, compliments I believe because of the "regifting" craze. My wife is handy with a sewing machine, so I'm sure that she could easily carve up a custom...

Offhand, does anyone know the dimensions of the crush washer on the bottom bolt of the middle gear cover? Mine seems to be weeping slightly and I wanted to replace it. Thanks!!

How hard is it to change the clutch cover insert? Mine is cracked but not leaking yet. I am going to do the DD mod to the clutch as I have the parts. I was thinking of going and buying a polished set of inserts. The one side is just two screws holding it on. The clutch side I don't know know how...

Is there any way to polish up the cover on a clear cover part?? I for some reason sprayed carb cleaner on it to remove some spot that would not come off with normal cleaner and now there is a haze on part of the it:bang head::bang head:

OK, so a few years ago, probably closer to 5, I found some really cool decals on eBay, that fit PERFECTLY over the carb diaphram tops! They weren't just plain decals either, they were sturdy and thick, kinda rubbery if you know what I mean, and concave a bit, but I can't for the life of me find...

Need a cool rad cover on my 2005 anny edition. :punk:

Ok, I have a 03 Max with 11,000m on her the valve cover gaskets are starting to seep. I just started to use AmsOil in her the last oil change. I have seen no less than 4 miles per gallon increase in MPG. I am going to change the valve cover gaskets before riding season. Will I have a problem...

Hey all, I adjusted my valves today because I had two leaking valve cover gaskets and figured what the hell. Everybody wasn't joking, this job SUCKED. Anyway, got it all done and am ready to put everything back together. Problem is, I didn't pay alot of attention to the orientation of the...

I was wondering if anyone sold something to dress up the engine covers. I've seen billet insert but they always have some kind of design I'm not fond of. I was thinking that it would be cool if someone made some chrome, or polished, rings that could be mounted to the stock engine covers...

The screws that hold the carb cover on are phillips head and the bike came with them horribly stripped. The previous owner told me about this at the time of purchase. I tried using the screw extraction tool I got from home depot and its a no go. It just files off more of the bolt. I've read...

:bang head::bang head:I over tighten the bolt that attaches the oil cover... Took it to the stealership... and the bolt got stripped. I just changed the oil so i can go for at least another 3000. I found another cover and bolt for 25 shipped. Any advice? They were talking about cracking the old...

Yamaha VMax Aftermarket Tank Cover Anybody have this faux tank cover? Curios ... It would really be cool if it was made to be a real tank that held fuel!!

Ok here's how I finally got my new boot on, after destroying my new paint job again .Put the boot on your swing arm. Drain hole down. Put retaining spring around the front where it (rubber boot) goes over the middle gear carrier. Line up the joint of the spring half way between the top and...

Hey guys, I was wondering if you could tell me the OEM Yamaha part number on the screws that hold the intake manifold covers on? I need to sync my carbs and two of the scews are on so tight I am going to ruin them to get them off and I'd like to have some new ones on hand. Thanks fellas