cover

Ok i give up i dont know how to get her sealed i put on a new gasket and it leaked oil at the bottom the thinest part of the clutch cover so i get a new gastket and put yama bond on both sides still leaks, clean old gasket off, get a new gasket take a thick sheet of glass tape some 220 grit to...

Hey guys, I recently developed a small oil leak on my front valve cover on my 2007 VMAX. This perplexed me because I never removed the valve cover and the bike only has 14000 miles. With further investigation under magnification I can see both of my valve cover gaskets are dry rotted! I am...

does anyone know where i can get the chrome button plugs to cover the allen bolt heads? comming up at a loss. the part # is floating around but the stealership plugs it in and says its discontinued.

What are the options on this plastic cover? Does anyone chrome them? Or are my two choices paint or carbon fiber? Thanks

Starts to be Typhoon season here and my previous cover is acting like a sponge. Is there anybody who could recommend me a good outdoor cover ? No need to specify that it has to be UV resistant and water proof (I even saw some storm proof made by oxford). Thanks

Hey guys I changed the oil last weekend and noticed that the bottom of the flywheel cover was leaking oil. It is not enough to leave more than a drop or two on my garage floor when she's sitting for a couple nights, but I would like to eliminate it. I put a new gasket on the cover when I...

Can someone point me to a good Chrome rad cover?

Hello, Does anybody know of a nice custom clutch cover with a see through screen for the 2nd Gen V-Max? I would be interested in getting one, but the ones that the V-Max specialist's offer are not really blending in at the bike, but stick out like a soar thumb, since they are all featuring a...

How hard is it to r&r the valve covers, I hate that magnesium look they have, and it's a rainy day here so I thought i make take em off and paint them black. In my best Mick Jagger voice, I see a valve cov ver and want to paint it blaaa ack.

where can you purchase the vmax side cover emblems? thanks, mark

I need to replace my valve cover Gaskets. Any Idea on what shop time should be if I have it done at the shop? A local mechanic told me he could do it in about 3 hours. If that is accurate it may take me 6? Any thoughts advice or input?

Hey trying to remove the secondary gear cover. I think that's whats its called. Iv tapped with a rubber hammer for quite some time. Any tricks for getting it off? No I havent removed the generator cover yet.

I have two reasons for this title. First, was the previous owner. Acquired the bike in March and up until now, everything he had told me about the bike has been accurate - even the "deficiencies". I felt pretty good about it. So, when he told me the bike had new plugs, I believed him and...

Just throwing it out to see if theres any interest at all...... I have an '06 that has 5K miles on it. Stock paint scheme. Black with shift red flames. I'd give it a 9 out of 10 as far as stock paint goes. Great shape Curious if anyone would be interested in a straight up trade for your...

Guys, question for you...My bike sits in my garage but with the weekend warrior woodworking I do it usually ends up getting an occasional layor of sawdust on it. This may be a stupid *** question but I have to ask.. Would covering the bike with a flannel sheet promote any kind of rust?

***** me never ordered a clutch cover gasket thinking I'd salvage my original one. It came off in about 17 pieces. Since it's not a cover that's actually holding any real amount of oil, can I use gasket maker until I get a new gasket?

I want to get one and leave it at work so i don't have to park my bike in the sun. will 98 inches be enough? http://cgi.ebay.com/ebaymotors/XL-Yamaha-V-Max-Vmax-Weather-Motorcycle-Cover-89-07_W0QQcmdZViewItemQQhashZitem3efed7ddc9QQitemZ270563532233QQptZMotorcyclesQ5fPartsQ5fAccessories...

I need a the water pump cover. It seems to be in two pieces with 5 bolts. Dealer wants me to order the whole water pump assembly ! Does anyone know where I can order just the cover? original black or brushed alloy?

hardware store didn't have any of the bolts that came off of the stator cover insert, how much room do I have behind it? Ok to put a bolt that has maybe 5mm longer length on it?

Does anybody have a stock right side radiator cover for sale, in nice condition?