end

I think you'll enjoy this read: http://www.vincentstreamliner.com The Magnesium Monster had been running so well that for the first time I was able to wander around the pits looking at other stuff. What really interested me was the double A fuel dragsters running the 392 cubic inch...

http://insider.foxnews.com/2015/12/08/watch-carjacker-fires-officers-out-car-window-during-high-speed-chase:clapping:

Two UFO SBD end caps F/S Slightly used $75 shipped

DETROIT, MI - Part of a four-year labor agreement with Fiat Chrysler that UAW workers will vote on next week calls for ending production of the Dodge Viper in 2017, Automotive News reports. The trade publication said the $5.3 billion in production investments laid out as part of the UAW-FCA...

.....

Anyone knows the exact diameter on header pipe ends as i don't have a caliper in hands? going for custom made slip-ons and i want to buy the correct size pipe.

? Sent from my SM-N920T using Tapatalk

I was working on my exhaust and removed the old gaskets hoping to do a cleaner job but i havent found gaskets yet so i installed the exhaust can back but now obviously there is a leak at all four pipes where they connect to each other. the bike seemed to run fine with a little power loss at low...

Can you use Race techs Gold Valve Cartridge Emulators with a Progressive front end lower kit and would there be a difference with them then with out them? Thanks.

Hey guys , was hoping someone could shed light on my problem. My servo works most of time and moves the black box at end of cable. Problem is the box isnt connected to anything and jut slides back and forth in the metal sleeve. Rather than pulling carbs and fixing has anyone just manually opend...

After replacing the springs with Progressive springs, the front end of the bike feels like it is high and stiff. There is very, very little bounce in the front end. Maybe this is normal but before I changed them I could easily bounce the front end up and down by simply sitting on bike and...

hello you may have had this before.mine is a 1998 vmac usa import with vboost .jya start numbers of engine an frame ,had bike 3 years now standard exhaust then another set off ebay tink stage 2 jetting everything ive done to bike top end is just on 110 mph.checked timming carbs diaphrams plugs...

So, as some of you know... I downed my Max in September, and to much chagrin it was totaled out. But after many phone calls to Sean, along with many emails and parts later, I now have a functional USD front end off a YZF750R transplanted to the max. The parts list goes as follows: Yzf750r forks...

I've decided to sell my bike. I have two small children and just have decided to no longer ride at this time in my life. It has 40k miles on it with no engine problems or transmission problems. I am the third owner, owner 1 was a female who rode with her husband long distances where it received...

Saw a thread somewhere recently (cannot find it again of course) where bar end mirrors were discussed. Someone had suggested the Yanashiki mirrors, but I just got mine in and they aren't compatible in any way shape or form. The mount does not meet up to the bar end at all and the bolt is far...

Finally wrapped up the blackout project the mods are: Powder coat and paint everything you can. Yamaha bolt gaiters from this thread: http://www.vmaxforum.net/showthread.php?t=34342&highlight=YAMAHA+BOLT+GAITERS forks in between triple trees: Eastwood 2k primer Eastwood 2k paint 1 1/2 PCV...

Hi Every body! Last week I put a new Shino on the front of my max. I did so because my old tire was scalloped badly. I also discovered my steering head bearings were quite loose. So I adjusted the bearings, installed the new tire and checked its ballance ( was right on no weight needed)...

I recently received a set of black supertrapps. The fine boys at usps decided to play smash up derby with the shipping box, the ends of the cans poked out of the shipping box, and the exhaust tips are bent up and scraped. Anyone know the best way to get them round again? I figure I could repaint...

Found this while searching for Venture differentials. Came off of an 81 XJ750 81 YAMAHA XJ750 SECA FINAL DRIVE DIFFERENTIAL I know it is almost a certainty that it would not be the same... but I cannot help but wonder. Would this diff work with the Vmax? Looks damn close to me.

the end cap on the throttle side fell off today somewhere, its long gone. what are some suggestions for bar ends? dont necessarily need to be weighted. Ive been looking online, and dont know what fits the max.