kit

i have been eyeing up a Cycle one off oil pressure kit for some time now, i was just curious what everyones experience is with these, ideally i want to get a kit that mounts to the speedo, only thing is the only ones i can see on the site are chrome and i want a black mount with a white face...

I want to check my bike to see if theres a jet kit. but i don't want to have to resync it as I don't have the tools or the know how. I beleive I am running way to rich and was told to check the jets and what not. Is this do able with out having to resync?

Just received my HID Headlight conversion kit from DDM. Where do you put all that crap...no whey it's going into the headlight shell but unless I alter the wring harness I don't see any way to get around mounting most of the componets in the shell. And the instructions say mount the ballast in a...

hi i am about to rebuild both clutch master and slave is there a how to out there on these i dont have the book yet sorry if its already in threads:ummm:

I'm going to do one I have supertrapps open end caps k&n stock box 8mm taylor wires, should I use 147 or 150 mains where should I run the clip on the needle any info would help

Just checking, I want to drop the bike 2", How often do you guys scrape the pipes or belly pans, putting in the race teck springs 1.0kg 250 lb rider, ufo exhaust, trying to see if I need 11.5" or 12" shocks? thanks for the input

I prchased 4 K&N air filters for my stage 1 with v-Boost. I have since purchased a Stage-7 kit, and found that I need two special K&N filters (front two) with holes for hoses to combine to a cannister of some type followed by a larger hose for the crank case. Is this all that is needed? Is this...

hey sean, couple questions/thoughts on your jet kit that maybe others have wondered. you use a similar oiling system as the stage 7. Why do we need the oiling system hooked up to the fill area with the airbox when its not there stock? I think i understand why the stage 7 needs it as the...

Here is two multi color led kits from glowguru.com 12 total led bars.

Anyone tried the kit mentioned in the title? The guy from England is selling a kit on eBay that includes heavy duty cables for the ground and starter.It is about $70 shipped so wanted some feedback before buying. Couldn't find anything using the search function.

This summer a friend of mine spent $400 on a light kit for his hog. After a few adult beverages I mentioned I could probably install one for much less. After some trail and error I found these at Auto Zone for $22. They include two 12" strips that can be cut so don't waste your money on the 8"...

Can anyone refer me to a good carb synch kit? Thanks, have a good one

Did a search but couldn't find the vendor from England that sells heavy duty wiring kits. He sells various versions plus manual radiator fan switches. The kits are supposed to fix grounding, crimp, R&R problems. He often has these kits on eBay but has none right now. Anyone have a link to his...

I have two carb racks sitting on my table. One came on the bike, one came off the bike. The second set MIGHT have a stage 7 kit installed. I looked at the needle sticky and the stage 7 needle looks identical to mine. However, the main jets or needles have no identifying marks of any kind. The...

I need to adjust the valves on my new-to-me Vmax. Does anyone have a loaner kit with assorted sims and specialty tools they rent out? I'd happily pay a deposit and such. The local dealer charges about $425 which don't sounds too bad for a service that is once every few years. But I'd still...

Just ran across this on eBay: ------- New Combo listing: Eliminates stock large air box! You get a set of four "4" individual air filter pods with clamps & a crankcase breather. Filter size: Low overall height= 3-1/2", chrome base= 3" diameter, chrome top plate= 2" diameter, filter area...

In my never ending quest to continue to fine tune my carbs, I not sure whats causing what I would refer to a cough or missing at 6K . What happens is from about 5700 if I wack the throttle wide open, I get a quick stumble/cough/miss that clears right up. Sometimes it does it , sometimes it...

Was looking under the hood and the filters are looking pretty gross. I just bought a 1986 vmax full kerker 4 to 1, K/n filters only 20,000 miles. It has been sitting for the last 3 years. It got a tune up, new oil, spark plugs, brakes, fork seals, they just didn't clean the filters. Was looking...

Is it worth going up to a stage one? What about a Morely jet kit? I wont be doing any other performance mods after this if that makes a difference. Even though 06 Max did an outstanding job setting up the carbs and stuff I still have that itch for a little more power. Thoughts?

i've been noticing a lot of brake dust since i upgraded to the galfer pads i got from sean. but today i noticed something really weird... the left side of the wheel has WAY WAY more brake dust then the right side. I can barely see any on the right side. I just put in new springs and the...