needed

Checked out a 96 with about 12k on the clock last night. It has 17" rear and front with radials, progressive springs and 440 shocks lowered 1/2 inch, UFO fork brace, 4-2 holeshots, Barnett clutch, braided lines, r1 calipers, oil pressure gauge, stage 1 jet kit :(, led tail light, aluminum...

After the Dyno Run I did a few months back, I've just been having fun with my 89. Doing lots of Rolling Burnouts and havin a blast. No one thought the Air Fuel ratios that printed were believable and the bike runs absolutely great. A/F 11,79, 11.80, 11.90. Well, I pulled the plugs after a trip...

I've got two stock springs and one PCW spring on hand. Been running the Double D, I've broken two driveshafts since installing it, and one trashed tranny although I can't say Double D was the cause of course. I'm leaning forwards running the PCW spring, got a crap load of money in this so far...

Hey guys I have a buddy in a jam, he lives here(MASS) and has family in Haines city fla, well they screwed him on a mobil home and now he needs a home repair guy to help himout. He is going to be there tuesday may 29 for a week if anyone here can help him out or knows someone that can help him...

Have a 2005. Is the crimp fix still needed on this year or later? Hear Yamaha fixed a lot of things but don't know if they fixed this one. Don't really seem to have any electrical issues. Have my seat off and thought if need be I'd do it. Thanks!

Can anyone tell me what the part number is for this bolt on the front fender 2002 Max or were I can find one. Thanks in advance, Ted B

My Neighbor /Friend was in a bad automobile accident which resulted in the loss of his right arm his daughter was driving ( she is ok) and side swiped a telephone pole the impact sucked him out of the car. I feel for him because i know how he loves to wrench on stuff car, bikes,tractors etc + he...

Thanks to "Firefly," I finally got my RICOR's as opposed to the Gold Valve Emulators. Without searching through many threads: what is the static sag I should be using, which I think is the distance above the open downtube the spacer should be portruding, (the spacer in the factory exploded...

I'm organizing my annual Western Canada Meet & Greet on June 9th. As it stands we have 22 confirmed V-Maxes, does anyone know if there is a limit of bikes before a permit is required if at all?

Getting my 05 stock exhaust ready for Ebay and noticed my left exhaust joint has a bolt broken off in it from the PO. I know I can have it drilled out and tapped but I figured I would check to see if anyone has one laying around so I don't have to bother the guys at work. There is a difference...

Ok, guys. I've got the bike reassembled enough to start testing for my electrical gremlin. I get stronk crank and no spark. I've got a test kit from Sean and have replaced my parts with his at the following locations bar switch housings left side cover relays and boxes tci brain ignition switch...

Hey Guys(or gals) , Im going to start a mod for percie :biglaugh: and Im looking for a 12v actuator with a 4-6 inch stroke & a 700 1000lb cap. I figure theres alot of different resources and applications that you guys (or gals):worthy:may have knowledge and or access to that I might not even...

I have this in my inventory and was thinking of using it on my '85 I is an ACCELL twin coil and wire kit. Has anyone ever used one of these and if so what is the consensus...

I know there are incredibly bright people here on this forum. So, I'm asking for any ideas to make a decent size oven for powder coating. I have the heating and controls part covered. Any help on ideas is appreciated. Obviously an oven can be bought, but not possible right now, $ not there. An...

So after joining the coast guard a year ago and being relocated from ohio to the oregon coast i've been loving riding along the 101 in the pacific northwest and surfing as much i possibly can. I recently got orders to Bahrain for a one year tour. So before i go i figure now is a better time...

Hello Guys need to get each side of the clutch and master cylinder diaphragm for my bike who is the cheapest out there?

No, this is not an emergency....but I would like some help and ideas on this issue. I have a 2005 VMAX with a custom sport tail section. I recently purchased a complete set of tins consisting of the tank, front and rear fenders, and custom side covers from England, and have sent them off to be...

Looking to by a sync and I am not sure what the vacuum range needs to go to.

Does anyone have, or could point me to some pictures of a Kerker exhaust on a VMax. I am interested in putting a header on my Venture. 1st big structural issue is the Ventures have a mono shock setup. I don't mind mod'ing one to not upsweep as much for clearance with the saddlebags. Gary

The VMOA is looking for a member who would be willing to take over as the VMOA Store Manager. Jim Mayes, the current manager, has to step aside after doing a wonderful job for the past year. If any VMOA member is interested in taking over this position please contact me via PM here or via...