Drilled out stock exhaust

[69Z28RSSS]

Hey everyone. I really like the looks of my stock exhaust 06 Max. I've heard of people drilling holes in the ends of the exhaust. After you drill out the rivets. Does anyone still do this and like it ? Or might I regret it down the road?

 

[Pighuntingpuppy]

When I looked this up, it seems it was mixed results. Some loved it, some regretted it. I opted not to do the option. My bike is stock except for LED lights.

 

[Montana vmax]

I did it. six holes per side, a bit louder. If you dont like it, you can tap it and plug it back up w small bolts.
Suits me.

 

[Parminio]

A good riding buddy of mine did it. Sounded like **** and hurt his performance a bit.

 

[Bullies74]

Previous owner drilled out the mufflers on my 94. It sounds okay, but not a discernible difference over stock imo.

Its odd though, at idle the tone is somewhat noticeable, but when throttling hard through the RPM,S you can barely hear it.

Unfortunately, once you drill the holes there’s no coming back.

 

[user 16790]

they can be welded and ground down or a new covering ring can be welded or even bolted over the holes, it could also be done to look decorative

 

[Radioguylogs]

I had an XS750 exhaust that was drilled out. It made strange whistling noises at certain RPM.

 

[69Z28RSSS]

Thanks guys. I think it will stay stock. Except for some new handle bars from Sean Morley when they come in