Finishing Toasted... Suggestions?

[CodeRedd]

Hey VMAX Team!
Been loving the first week of my New (to me lol) 1998 VMAX 1200. Finally started working on some of the cosmetics and Lighting upgrades I want to tackle. The bike I purchased is mechanically sound from front to back, but the guy very practical and was not concerned about keeping her super pretty...

The finish on the fake Ram scoops in particular is pretty beat up and worn on both, I'll attach pictures...
For shits and giggles I tried cleaning and polishing which really only showed me how bad the truly is...
Think I'm just going to paint them to match the black wheels as that's the easiest solution, but before I do any thoughts on other options or what i could maybe do to maybe restore them?

Thanks!

 

[MaxMidnight]

One option attached

 

[CaptainKyle]

I have a video on YouTube under Kyle Clegg that shows you how to get them back to a nice brushed finish.

 

[leondante]

Hello. Polishing them will put them like new, for real don't worry about it. It takes like an hour each one, but they get amazing. Just be patient with it. Remember they have clear-coat from stock, so polishing them without stripping that will do nothing. I suggest a good transparent primer and new clear coat after it, so they last ten years as new instead just 10 days.

I'm attatching a couple of examples I did some years ago. Really, it has very good fixing.

 

[Davelaf]

One option attached

So that gives you a almost chrome looking finish? I have a new winter project, maybe sooner!!

 

[Davelaf]

Hello. Polishing them will put them like new, for real don't worry about it. It takes like an hour each one, but they get amazing. Just be patient with it. Remember they have clear-coat from stock, so polishing them without stripping that will do nothing. I suggest a good transparent primer and new clear coat after it, so they last ten years as new instead just 10 days.

I'm attatching a couple of examples I did some years ago. Really, it has very good fixing.

So do you need a spray gun for primer and clear coat? Or can you get it in rattle cans¿

 

[MaxMidnight]

So that gives you a almost chrome looking finish? I have a new winter project, maybe sooner!!

No, not realy.
I
Done properly they are shiny but not as much as chrome.
The important point to note in the guide is that when you move to the next grit you need to remove all of the scratches from the previous grit before moving on.

Now they look all shiny what next?

If you add clear coat depends on the weather condition where you live (rain and salt = bad) and if you are an all weather rider.

IMO they look better uncoated.
If like me, you had enough of getting wet when younger and don't need to ride in inclement weather then all that will be required is an occasional buff up will keep them looking good.

However, if they need protection then a clear coat is the way to go. You can do them with rattle cans and whist it is possible to get a good finish (more elbow grease required) the coating isn't as resilient as (say) a two pack lacquer. It would be worthwhile having a word with a couple of bodyshops to see how much it would cost to adding your scoops when applying a clear coat to one of their jobs.

Another alternative is clear powder coating. Whist I don't like paint lacquer I like clear coat powder coating less. To my eyes (at least) it look 'thick'.

 

[leondante]

You can get those in rattle cans. Just be sure is a good product.

So do you need a spray gun for primer and clear coat? Or can you get it in rattle cans¿

 

[CodeRedd]

Awesome! Thanks for the replies and links! Exactly what I was looking for!

Love this community!