Halos installed in the scoops

[02GF74]

The two relays I tested, the lamps are either on full power, the when they should be off, they still emit light but are much less bright. *

Over here in the UK I'm pretty sure thay would not be legal.

* long story but I did investigate the circuit to do this and made one up. I don't recall the lamps emitting light when "off" but I will revisit. In other words the $3 relays are a piss poor design.

 

[Allen Zielinski]

02GF74 I guess that's what you get for $3.00. To answer your question the relay I have turns the lights off completely when they are off.

 

[T-Bone]

Halo Light Turn signal
Hey does anyone sell the plug and play kits anymore? I have looked around and can't seem to find them
Thanks

 

[Madmaxx]

Halo Light Turn signal
Hey does anyone sell the plug and play kits anymore? I have looked around and can't seem to find them
Thanks

I couldn't find Mike Kemp's kit anymore, so I decided to make my own plug and play kit using Diode Dynamics switchbacks, spacers for the top 80mm halo (78mm hub centric spacers for wheels work perfectly), and Yamaha connectors from Custom LED. I already have their relay for my integrated taillamp.

Notched hub ring so that circuit board and wiring can sit flush.

I am going to solder and shrink tube everything.

 

[Fire-medic]

Looks like a neat job of things, I'm sure others will be interested in seeing it done and operational.

 

[KSMAX]

[nicNice

I couldn't find Mike Kemp's kit anymore, so I decided to make my own plug and play kit using Diode Dynamics switchbacks, spacers for the top 80mm halo (78mm hub centric spacers for wheels work perfectly), and Yamaha connectors from Custom LED. I already have their relay for my integrated taillamp.
View attachment 88200
Notched hub ring so that circuit board and wiring can sit flush.
View attachment 88201View attachment 88202View attachment 88203View attachment 88204
I am going to solder and shrink tube everything.

eheyQUOTE="Madmaxx, post: 527878, member: 75694"]
I couldn't find Mike Kemp's kit anymore, so I decided to make my own plug and play kit using Diode Dynamics switchbacks, spacers for the top 80mm halo (78mm hub centric spacers for wheels work perfectly), and Yamaha connectors from Custom LED. I already have their relay for my integrated taillamp.
View attachment 88200
Notched hub ring so that circuit board and wiring can sit flush.
View attachment 88201View attachment 88202View attachment 88203View attachment 88204
I am going to solder and shrink tube everything.
[/QUOTE]

I couldn't find Mike Kemp's kit anymore, so I decided to make my own plug and play kit using Diode Dynamics switchbacks, spacers for the top 80mm halo (78mm hub centric spacers for wheels work perfectly), and Yamaha connectors from Custom LED. I already have their relay for my integrated taillamp.
View attachment 88200
Notched hub ring so that circuit board and wiring can sit flush.
View attachment 88201View attachment 88202View attachment 88203View attachment 88204
I am going to solder and shrink tube everything.

Nice

I couldn't find Mike Kemp's kit anymore, so I decided to make my own plug and play kit using Diode Dynamics switchbacks, spacers for the top 80mm halo (78mm hub centric spacers for wheels work perfectly), and Yamaha connectors from Custom LED. I already have their relay for my integrated taillamp.
View attachment 88200
Notched hub ring so that circuit board and wiring can sit flush.
View attachment 88201View attachment 88202View attachment 88203View attachment 88204
I am going to solder and shrink tube everything.

 

[Madmaxx]

...

 

[Coastal Grey]

Thad a really nice looking VMAX nice job on that!!

 

[jlewis02]

Want to get halos for mine.

 

[Pighuntingpuppy]

A couple weeks before Memorial Day I will have mine installed for 2 years. Mine are the cheap Chinese halos but so far, no issues with them. They still function as the day I installed them. And despite the time, I have nearly 20000 miles riding with these halos.

 

[Madmaxx]

Here you go!

 

[KSMAX]

[nicNice
eheyQUOTE="Madmaxx, post: 527878, member: 75694"]
I couldn't find Mike Kemp's kit anymore, so I decided to make my own plug and play kit using Diode Dynamics switchbacks, spacers for the top 80mm halo (78mm hub centric spacers for wheels work perfectly), and Yamaha connectors from Custom LED. I already have their relay for my integrated taillamp.
View attachment 88200
Notched hub ring so that circuit board and wiring can sit flush.
View attachment 88201View attachment 88202View attachment 88203View attachment 88204
I am going to solder and shrink tube everything.

Nice
[/QUOTE]
I've been locked out of the forum for some reason....tried again and voila, I got it! I just wanted to say VERY nice job on the kit! You used the best halo made!

 

[KSMAX]

I have decided to start doing some limited runs of 5 kits at a time. These are by PREORDER only. Shoot me an email, and I will respond with where I am in production. I had some tech troubles getting into the forum, but it suddenly let me in. I'm recovering from major back surgery (almost to the point of figuring how to walk again), so I am pacing myself. My email addy is [email protected].

 

[MileHayabusa]

Good to see you back, Mike.

And having one of Mike's kits I can tell you they are well thought out with great instructions and very high quality...well worth it.

 

[KSMAX]

Thanks much. I believe in a premium product for a premium motorcycle.

 

[20Vmax20]

I have one of Mikes kits and it is great. I only have about 4000 miles on them, but the kit is well thought out and easy to install. Thanks Mike!

 

[KSMAX]

Thanks so much. Life has been a bumpy road. I'm glad to help when I'm physically able.

 

[rebeltaz83]

Glad to see you back Mike. Praying for speedy recovery.

 

[crynool]

Here you go!View attachment 88973View attachment 88988View attachment 88989View attachment 88987

I want the headlight

 

[John Henderson]

I would like to get a kit or just a walk-through on doing my own... like where parts are bought and then altered... have no problem doing my own soldering work etc

Thank you sir. If anyone is interested, just email [email protected] or just call or text me at 785-814-0134. Or check me out on Facebook!