Mark's Exhaust...

[sdt354]

Must be Mark's install day, just finished. Great fit. Tomorrow, ride and tune. New t-stat gaskets and a flush too.
Steve-o

 

[alorio1]

You guys keep us posted on the tuning after the install, Im sure you will be pleased with the sound...........:eusa_dance:

 

[MR_NST]

great read guys, i cant wait for mine.... it cant get here fast enough.

peace,
evan...

 

[sdt354]

Got going on tuning today. First thing I noticed was how ugly the center stand looks now-off it comes. Went to the hardware store and went throughg the stainless washers till I found 4 about .0345-.035 thick. Richened up the idle mixture, all between 3 1/4-3 1/2 turns. Went for a ride on a low traffic road. Bike ran very well. Cranked the mixture screw out another 1/2 turn but changed it back. Backed them all out 1/4 turn or so again and think she runs best there. By Sat I'll try shimming the needles w/ before and after plug check. A Morley jet kit is on my mind. I'll Dyno when I think I'm ready. I love this exhaust.To be continued.
Steve-o

 

[sdt354]

You guys keep us posted on the tuning after the install, Im sure you will be pleased with the sound...........:eusa_dance:

The sound is awsome. I came out of my residential, quiet neiborhood easy on the throttle. Let her go to redline on the main road though. Great sound.

 

[Redbone]

The sound is awesome. I came out of my residential, quiet neighborhood easy on the throttle. Let her go to redline on the main road though. Great sound.

It's very much addicting to hear the Mark's exhaust sing that sweet Vmax tune as you rip though every gear enjoying the awesome sound only a V4 can produce!unk:
I spent one year before buying my Marks system and now have 2+ seasons enjoying it, I couldn't be happier! :thumbs up: :thumbs up:

 

[gamorg02]

The sound is awsome. I came out of my residential, quiet neiborhood easy on the throttle. Let her go to redline on the main road though. Great sound.

hey man if you need a better assortment of some washers i have some radioshack ones laying around.

i also have some stage 1 needles for sale possibly (haha also the rest of the kit!)

 

[dannymax]

Got going on tuning today. First thing I noticed was how ugly the center stand looks now-off it comes. Went to the hardware store and went throughg the stainless washers till I found 4 about .0345-.035 thick. Richened up the idle mixture, all between 3 1/4-3 1/2 turns. Went for a ride on a low traffic road. Bike ran very well. Cranked the mixture screw out another 1/2 turn but changed it back. Backed them all out 1/4 turn or so again and think she runs best there. By Sat I'll try shimming the needles w/ before and after plug check. A Morley jet kit is on my mind. I'll Dyno when I think I'm ready. I love this exhaust.To be continued.
Steve-o

Grats-o Steve-o!! Hell of a system ain't it!! You're right on it man, shim .035 +/-, A/F 3 1/4 out and....smile!!

Man, I tell ya, downtown Chatham just ain't ever gonna be the same again after we do our annual Main St. thing for BR11!!

By the time they begin to recover BR12'll be here and we'll do it all over again!! :rofl_200::rofl_200::rofl_200:

 

[sdt354]

hey man if you need a better assortment of some washers i have some radioshack ones laying around.

i also have some stage 1 needles for sale possibly (haha also the rest of the kit!)

Thanks Garrett,might take ya up on that.
Steve-o

 

[sdt354]

Grats-o Steve-o!! Hell of a system ain't it!! You're right on it man, shim .035 +/-, A/F 3 1/4 out and....smile!!

Man, I tell ya, downtown Chatham just ain't ever gonna be the same again after we do our annual Main St. thing for BR11!!

By the time they begin to recover BR12'll be here and we'll do it all over again!! :rofl_200::rofl_200::rofl_200:

Hey Dano, you did the research.i just followed. Can't wait for BR11.
Steve-0

 

[gamorg02]

Thanks Garrett,might take ya up on that.
Steve-o

np u know where to find me. we could even do a halfway drop off one nice day (weekend or weekday if its nice enough).