Maxxecu VMX ”Mohko”

[Rauno Vekkila]

Hi,

Starting a fuel injection project with Maxxecu Mini. It should speak oddfire as well. No specific time schedule.

My first step is the fuel pump. There is only limited amount of space available, so I decided to install it into gas tank.
Let see how it goes.

 

[Rauno Vekkila]

Some minor setbacks but now the collar is ready for the Daewoo fuel pump unit

 

[Rauno Vekkila]

Now finished. Seems to seal the gas also. Not pretty like jewel but self made

 

[Rauno Vekkila]

Meanwhile in Alaskan Speed And Bakery Shop: Dreaming about big bore

#bigbore #moreismore #biggerisbetter

 

[Rauno Vekkila]

Little customizing as well. A sleeve for the Ford’s legendary teardrop tail light

 

[Rauno Vekkila]

Damn, compression height is only 1.5mm taller but those valve pockets are perhaps too close to center of the piston to machine them.

 

[Rauno Vekkila]

Some sheet metal works before the parts goes to bodyshop. Let’s modify those foot pegs at the same time. Originals are quite clumsy and heavy.

 

[Rauno Vekkila]

Tour De Luxe differential from the states. Sold as working condition.
That was boldly said. Gear hardly turn around and there was metal debris within the oil. Return and refund.

 

[Rauno Vekkila]

Suzuki K8 fork service. Seals were leaking. Springs changed at the same time to 10Nm/mm. Needed some special tools but I managed to manufactured them.

 

[Rauno Vekkila]

Used 85mm piston set arrived. Some minor dents but nothing fatal. Next step is to manufacure proper cylinder sleeves from the core cos’ ”ready, set, go!” -versions are way too expensives for my budged.