My chasis is bended. Any ideas?

[leondante]

I'm doing a new thread for this, is not a question anymore but a project for fixing a frame. Better that way I think.

 

[one2dmax]

If the front fender hits the radiator when the suspension goes down you likely have it too low internally. I can't imagine the amount of force it would take to get the front neck to push in enough to let it do that any other way. The heavily crashed 2005 I had at the track went end over end 7 times and still wasn't that damaged.

 

[leondante]

Sadly mine has clear evidence of an accident. Not only the small dent on the neck, but I have the damaged radiator, the old brakes, and all the angles of damage sings clearly how it was the accident. Even the dude told me "it had a small hit". I'm damned because even with the accident was maybe the very best option I had along the months I've been looking for an Vmax without horrendous modifications. Also the dude dropped loot, a big box with a full plastics set and a couple more of fake intakes and a gas tank and lights and stuff that was good. The price was fit to what I was taking, I cannot make a complaint except for the fact that it was NOT a """small""" hit. But he told me and I checked it all and I accepted it as it is.

I'm sure is not the suspension being low inside. The frame is obviously deformed and even without anything over it you can see the fender abnormally close to the radiator.

If the front fender hits the radiator when the suspension goes down you likely have it too low internally. I can't imagine the amount of force it would take to get the front neck to push in enough to let it do that any other way. The heavily crashed 2005 I had at the track went end over end 7 times and still wasn't that damaged.

 

[Davelaf]

These things are tough, if it rides out ok, hell why not. You get a left side Radiator plastic in your box of loot. I got one from a eBay seller, looked like it sat in a field for ten years, sent it back.

 

[leondante]

These things are tough, if it rides out ok, hell why not. You get a left side Radiator plastic in your box of loot. I got one from a eBay seller, looked like it sat in a field for ten years, sent it back.

The bike doesn't fell or see insecure, but I enjoy deeply fixing these kind of things, so I'm doing it but it will take my time for sure.

 

[leondante]

Yesterday arrived the laser things I just bought for doing a laser measurement device for the Frame Warper. I'm baptizing it as that. It will measure square angles for the sides, castle angles, the axis along the frame from front to rear, and compare previous and post modification positions of the frame. I have like 20 laser heads that spit lines, crosses and points.

 

[Davelaf]

Yesterday arrived the laser things I just bought for doing a laser measurement device for the Frame Warper. I'm baptizing it as that. It will measure square angles for the sides, castle angles, the axis along the frame from front to rear, and compare previous and post modification positions of the frame. I have like 20 laser heads that spit lines, crosses and points.

Yesterday arrived the laser things I just bought for doing a laser measurement device for the Frame Warper. I'm baptizing it as that. It will measure square angles for the sides, castle angles, the axis along the frame from front to rear, and compare previous and post modification positions of the frame. I have like 20 laser heads that spit lines, crosses and points.

Wow, impressive, I was going to say I saw a frame for sale a few months ago, but are you going to try to straighten the one you have?