New Muscle Gauges

[one2dmax]

More photo's added all the time as we get more of these in with different configurations. The dual gauge is GPS based so no speedo cable. Perfect for the inverted front ends (note we can also provide a billet speedo eliminator if desired).

ALSO, has a tach built in with shift light! The tach can be swapped to be the larger readout with the gps as the smaller readout (the led light would still be rpm based). *NOTE - rpm range will be 10k unless requested to be different (pics showing 8k are from the customization site as 10k isn't a normal option).

The small lcd readout shows, Odometer, Trip, Elevation, Time (GPS based), 1/4 mile time, top speed, and more!

Can be configured in MPH (120mph, 160mph or 200mph) or KPH (200kph or 260kph). The needles, back ground color, style, and more can be customized. Logo, no logo, indicators for high beam and signal, and even more can be added.

Pricing will be $500 plus shipping which includes the mounting cup in either aluminum (picture added of raw version) or plastic (currently pictured).

 

[CrackerRican]

Very nice Sean

 

[Hamkaas]

Yep agree. Very nice Sean!

 

[PATMAX]

Better than nice! Yamaha could not have done better

 

[jkyle187]

Is this for gen 1?

 

[ga_max]

The most important question is how much will it cost ? It does look awesome.

 

[davesax36]

Facebook says $350-400 but the cups haven't been made. That might push the price up.

 

[Tex85]

Looks nice, good job Sean.

 

[tugla]

Pretty neat, very nice.....gonna look sweet on the bike
wish the tach was the larger and speed smaller ....don't wanna know sometimes how fast I'm going lol

 

[bazwell]

Thats excellent! I'll have one!
I don't have any of that speedo mounting hoo-haa on mine.
I would like to know what the finished product looks like and what mounting options ate availanle.

 

[one2dmax]

These are for the Gen 1's. Very customizable. Cost will be $400 including shipping and the customization costs. Email me at [email protected]

This does not include the mounting cup costs which I don't have yet. Hope to get a cup made soon and pics posted up.

 

[dannymax]

That's really cool! Opens up a spot in the instrument pod for more gauges too....oil press., fuel, voltage meter, etc. :clapping:

 

[one2dmax]

Here's the other pair we got in for the Venture project. Would be easy to make a double setup fit on the max too.

See how the Speedo/Tach setup has turn signal indicators as well as a high beam. I will ask if additional indicators can also be done to maybe move the entire set of indicators from the stock cluster location.

 

[one2dmax]

Pretty neat, very nice.....gonna look sweet on the bike
wish the tach was the larger and speed smaller ....don't wanna know sometimes how fast I'm going lol

We can in fact swap sides and sizes with the speedo and tach!

 

[davesax36]

Yeah. Big tach, small speedo, and a double setup for the other stuff. Then we can flush in a gps in the old cluster spot.

 

[CrackerRican]

Yeah I'm liking all the possiblities to this

 

[one2dmax]

The smallest the quad gauge is available is the 3-3/8" gauge. The one pictured is a 4". They have larger available too. I already asked and 3 LED"s are all they can install at this time. Not sure if I can pay them a little bit to design a new board to add the remaining two indicators to get them all in place on the one gauge (would be awesome).

Here's a friends double setup he did years ago with Autometer stuff. We could do a very common design for these new gauges easily enough.

 

[robmac]

Thats excellent! I'll have one!
I don't have any of that speedo mounting hoo-haa on mine.
I would like to know what the finished product looks like and what mounting options ate availanle.

I'm interested in a gauge too mate, we could buy together and save a little on postage if you're keen? Looking forward to getting final dimensions/photo's including the cup and total $$..

 

[tugla]

We can in fact swap sides and sizes with the speedo and tach!

well now...things getting more interesting now...:hmmm::thumbs up:

 

[one2dmax]

Guys, if you're interested shoot me an email and i'll get some info to you so you can work up the specifics.

Sean
[email protected]