Suspension adjuster

[mgrowc1]

Don't suppose anyone has a spare I can buy or know where I can get one. Apparently the previous owner lost it for my max.

Thanks,
MG

 

[gamorg02]

the spanner wrench thingy?

 

[dannymax]

Don't suppose anyone has a spare I can buy or know where I can get one. Apparently the previous owner lost it for my max.

Thanks,
MG

If you have stockers won't a screwdriver work?

 

[mgrowc1]

I tried a screw driver and cannot get it to work.
I asked here a few weeks ago and was told i need to wrenchy thing

 

[one2dmax]

If you are talking about the rear preload then a spanner is what you would normally need. If you don't have one you can try a punch that fits the holes the best.

Sean

 

[[email protected]]

If you are talking about the rear preload then a spanner is what you would normally need. If you don't have one you can try a punch that fits the holes the best.

Sean

+1 A correctly sized punch worked just fine for me. It takes some effort to get it to turn.

 

[mgrowc1]

Forgive this dumb question but what you mean by a punch?

 

[one2dmax]

A tool called a pin punch. They are similar to a small chisel but blunt ended and round to knock stuff out of holes.

Sean

 

[naughtyG]

You can get shock spanners cheaply just about anywhere, most stealers, even hardleys, carry them. Just make sure it has the right diameter and the end bit fits in the holes.