What did you do to your Vmax today? Part 2

[maxrom]

I did the
HONDA CBR600RR / CBR900RR led brake light LED conversion, as seen in this post

http://www.vmaxforum.net/showthread.php?t=14383

But, with some machinery oportunity at work, THE ORIGINAL POST WAS GREAT, BECAUSE IT WAS DONE IN THE LEAVING ROOM OF A CONDO.

the way i did, is a full like original = fender frame hold the tail light as original

Thank`s for the original post and to the FORUM

just sharing:biglaugh:

 

[bazwell]

Re-did my clutch without the half friction. Put fluid in and bled rear brakes. Fitted the new battery (you need to cut 2 slots with this brand - see pic). Sorted out about half the wiring. Tried to bleed the clutch but the master cylinder jammed.

 

[CaptainKyle]

Nothing today but remove my rad covers & box up to send to Bazwell but that damn monkey is calling. I see the slotted fighter side covers & fiberglass radiator covers comeing from Boxenstop soon..

 

[bazwell]

Nothing today but remove my rad covers & box up to send to Bazwell but that damn monkey is calling. I see the slotted fighter side covers & fiberglass radiator covers comeing from Boxenstop soon..

Today I paid Kyle for rad covers he sent me. :eusa_dance:

Monkeys don't like the heat. Mine deliberately breaks things. I think he did a poo in my clutch master. :damn angry:

 

[Fire-medic]

Just ordered a clutch master cyl for my other Yamaha (FZR1000) while waiting on the parts to come back from the machinist for my VMax. Tried a rebuild kit but it didn't work.

Bazwell: both, leaked & jammed-up. No burrs or anything obvious, it was a made-in-Japan K & L kit. I always wondered why they make you install the plunger rubber yourself, why don't they do it?

 

[bazwell]

Just ordered a clutch master cyl for my other Yamaha (FZR1000) while waiting on the parts to come back from the machinist for my VMax. Tried a rebuild kit but it didn't work.

Did it jam up, or did it leak?

 

[bazwell]

The mod monkey got very mad.
He says he reads the internet every day, and I shouldn't say things about him.
He told med to say that he didn't poo in my clutch master cylinder, and to say that the mod monkey is god.
He also told me he would loosen off the big end nuts if I didn't say it wasn't his fault, and it never is.
He also said I drink too much.

Sorry Mr Monkey. :worthy:

 

[bazwell]

Today I fixed my clutch master cylinder and the mod monkey helped a lot.

 

[vmax2extreme]

After sitting on these accent lights for a year now, finally got off my a$$ to start the building of the circuits and preparing for mounting. These will look great on my '05 being ruby red SMD LED's. Also picked up a remote module that has multi functions for the lights. I like the breathing effects it will render!

 

[PDWeyand]

I pulled the lolly pop turn signals off the rear and replaced with a mini bullet style that have a two way bulb, so I now have markers and turns from them. For as little as they are they are very bright.
unk: Have lights be seen.

 

[Horrendous]

Cool blinkers

Sent from my Desire HD using Tapatalk

 

[Gotta V Max]

Took mine out today for the first time after it's winter hybernation, with a new final drive fitted. Lovely and no racket on part throttle.

 

[WVxNitemare]

I just finished puttimg mine in various boxes while i wait for my new awesome transmission from morley lol. i have heard of bikes in pieces... now i have one lol.
many thanks to sean and his assistance.. god knows ive emailed him enough times lol.

 

[bazwell]

Put some fuel in and primed the pump and got fuel pressure.
Put in oil and coolant. Coolant leaked out from what looks to be a cracked thermostat housing. I'll pull it off tomorrow.
Cranked up oil pressure, fitted the plugs and COP's.

Started her up! :eusa_dance:

Only long enough to make sure it idled, so that I know I haven't stuffed up the carbs, and that the COP's work. No funny noises or anything bad. unk:

YAY!!! IT WORKS! :biglaugh::biglaugh::biglaugh::biglaugh::biglaugh::biglaugh:

Every step forward is treasured at the moment.

 

[[email protected]]

Put some fuel in and primed the pump and got fuel pressure.
Put in oil and coolant. Coolant leaked out from what looks to be a cracked thermostat housing. I'll pull it off tomorrow.
Cranked up oil pressure, fitted the plugs and COP's.

Started her up! :eusa_dance:

Only long enough to make sure it idled, so that I know I haven't stuffed up the carbs, and that the COP's work. No funny noises or anything bad. unk:

YAY!!! IT WORKS! :biglaugh::biglaugh::biglaugh::biglaugh::biglaugh::biglaugh:

Every step forward is treasured at the moment.

unk: that has to be a great feeling!

 

[bazwell]

unk: that has to be a great feeling!

Yes it is! :clapping:

Today I pulled off the thermostat housing, but couldn't see any cracks. Found an o-ring that will work and put her all back together.

I ran her up to operating temp and let the fan cycle a few times.
There was water leaking from near the radiator cap, but it mostly cleared up after the first fan cycle. There's a couple of little water leaks still, but I'll just hope that they clear up too.

Ran it thru the gears on the center stand. No funny noises. :biglaugh:

ALMOST got enough bike to ride it. SOON, SOON!!!

 

[naughtyG]

Yes it is! :clapping:

ALMOST got enough bike to ride it. SOON, SOON!!!

By the time I get back home my bike should've arrived, and yours should be ready. I look forward to a ride together! We can start the Vmax club of WA lol

 

[CaptainKyle]

By the time I get back home my bike should've arrived, and yours should be ready. I look forward to a ride together! We can start the Vmax club of WA lol

I need to come visit yall over there. To bad its to much trouble to send my bike over to ride.

 

[naughtyG]

I need to come visit yall over there. To bad its to much trouble to send my bike over to ride.

I'll let ya ride mine if you pop over =

 

[MR_NST]

Plated the bike today. main streets are clear, but side streets are still an icy mess. ive seen a few bikes out this weekend. Watch for gravel my melting snowbound friends.

peace,
evan...