size

Edited for content

So I thought I posted this earlier (my apologies if I did as I'm using the tapatalk app). I need to know what size the castle nut is on the rear axle. Bike bandit doesn't list the size, just the name and that they want 20 bucks for it. Thanks for the help!

Don't ask how, but the castle nut on the rear axle is less than usable after a recent incident........ Just need to know the size of that thing so I can order a new one!! Bike bandit simply lists it as a castle nut for $20. Don't think I need to spend 20 bucks on a nut... Or do I??

Edited for content

Ok, in my quest to make my bike the perfect bike for me, I have found I want some changes in the braking department. While the stock Vmax brakes seem to do the job just fine in most instances, I do know that they can be better. With the front brakes, the pull feels lighter than what I would...

Just wanted to check the size of pipe used by marks etc. The st/st I have is 38mm OD, 1.2mm wall...

Anyone know off the top of their head the size of the nut welded on the stock muffler flange? Thnx

Does anyone can help me by telling what size and what thread does Mark's exhaust cans have for bolting the exhaust tips ? I am sure it is a U.S thread . I need exact numbers so i oreder some new ones

My recently purchased 86 Max came with SuperTrapp Slip-on's that were in terrible condition so I chunked them and installed the stock mufflers. I found out that the bolt that connects the mufflers under the center stand is missing. Does anyone know what size it is and if I can get one at Home...

K ... so ... I have ordered a replacement carb slide/diaphram because the diaphram repair on my number 1 carb ain't gonna last. When the Stage 7 kit was installed, instruction 1 [1. Remove the vacuum slides from the carbs. Remove the stock needles and spacers, noting the order of assembly...

Looking at finding a replacement headlight for my 85, just wondering if anyone knows the measurement across on the stock sealed bulb is? My bike is stored about 45 mins away so not so easy for me to measure..

What tire sizes can be run on the rear of the max? Thinking about going with shinkos 230's....

Got a large T-shirt a few years ago..only worn a few times but it fits like a medium and is too tight for me. First to contact and send me a SASE gets it.

As 93 is the changeover year, can you confirm that it has the 43mm forks please, and not 40mm? I assume it is 43mm, I ordered a fork brace need to know :bang head::bang head::bang head:

As 93 is the changeover year, can you confirm that it has the 43mm forks please, and not 40mm? I assume it is 43mm, I ordered a fork brace help :bang head::bang head::bang head:

I have just acquired a 1989 V-max. It is stock, has 17,000 miles, and has been sitting for 4 or 5 years. I'm working on getting it running, and among other things, it need new tires. I want to stay with stock size tires, and am considering either: Bridgestone G525 / G526 or Dunlop...

Danny has my carbs and I was wondering what a good size main jet is to start out with on a all stock drive train minus a full length UFO 4-1 exhaust. Thanks

I'm thinking of changing both master cylinders on the handle bars to some newer Nissin units. I rebuilt the stock Vmax ones and one is leaking and I don't like how the powder coating came out. For the clutch MC, I assume I should stay with the bore size that the stock MC has. I have 6 piston...

Hi, Would different needles have different optimum main jet size or is optimum main jet the same for all setups? Thanks!

i really like this bike... would love to make mine look similar... anybody know the rear tire size in the pic or what rear fender he's using? are those longer fork tubes? http://p1.bikepics.com/2009/09/25/bikepics-1789161-full.jpg it looks like a stock swingarm but i cant tell...