size

Any know the bleed nipple thread size? I want to replace them as one on my rear caliper is siezed. I will try brute force and pliers, and then replace or junk the caliper and replace, but I want these...

I want to get one and leave it at work so i don't have to park my bike in the sun. will 98 inches be enough? http://cgi.ebay.com/ebaymotors/XL-Yamaha-V-Max-Vmax-Weather-Motorcycle-Cover-89-07_W0QQcmdZViewItemQQhashZitem3efed7ddc9QQitemZ270563532233QQptZMotorcyclesQ5fPartsQ5fAccessories...

Hi, My current muffler is a 20" over racing, I will need to replace the carbon sleeve which already cracked on the mounting point, maybe because it's too heavy. So before replacing the sleeve, I wondered if I should let it that long or not. I wanted to understand what is the impact of...

I'm still in the process of tearing down this '88 engine for a complete rebuild... how do I know which size ring set to order for the pistons? From what I saw in the parts fiche, there's stock and then two sizes of slightly oversized. Are those intended to compensate for wear on the sleeve?

Is it 10mm x 1.25, or is it 10mm x 1.00. Or something different?

Hey guys I can't seem to find the handle bar size.I've spent a bit of time looking around the forum and I came up empty.Also if you guys wouldn't mind posting a few links to what grip choices are out there I would really appreciate it Thanks very much!!!

I want to add some color to my spark plug wires. As they are kinda new don't want to replace and have heard a suggestion on covering them with colored heat shrink tubing. What size tubing should i get and also any thoughts on the subject? thanks Michael hansen

in the manual it shows the california models use a 130 throttle valve (brass butterfly) and the other states use a 125.....whats the difference? what difference would swapping from one to the other have?

I've searched the posts but have yet to find a definite answer to how to hookup my LED turn signals. When I connect the rear two, they just blink fast (I expect that because it thinks the bulbs are gone) however when I connect the front two, all 4 led turn signals come on either way but at a...

I am in process of rebuilting carbs,and not sure what jets to use. Bike does have supertrapp slip ons,and I live in Chicago not sure about altitude.Now I have 152.5 should I try 147? Thanks

has anyone ran a 100/90/18 . if so what did you think? I really personally don't like the looks of the 110. scooter

Does anyone know what metric tap size is needed to get the shock mount from my Vmax to go into a 1999 Venture final drive. I tried to find a 86-93 Venture final drive to no avail, so I'll have to drill and tap the shock mount on this one. Thanks,

One of the carbs on my 85 max has a screwed up air/fuel mixture tread in the carb. I measured the pitch and it is .5(really fine pitch), But I am not sure the size. I think it is 6mm. Anybody had this problem. I can only get the air fuel screw down about 2.5 turns, so I know the threads in the...

Hey what size rortors do we have on our max's. I am about to get a disk lock and need the size. Also about to order a dowco weather all and it says to get a medium but I am thinking a large size. Anyone have experience? Thanks,

Hi, Does anyone know of a GOOD resource to find out what size bolts and screws that are on a VMAX ? Ron

Hi Folks: When checking Yamaha's part diagrams for the carbs, I notice 2 different size possibilities for the PAJ1 (or the "Pilot Air Jet 1")...they show a #90, as well as the possibility of a #100 (which they call a "Power Jet"). What is the size supplied when one buys the bike, and when...

Looking for the correct size barsnake that will fit in stock bars ? Its come down to ST-1 or ST-2 . Have any of you guys put one in and did it solve the prob , are they as good as i hear :confused2:

getting ready to dissassemble my forks on my 86 to replace all seals and install progressive springs and I'm not sure of the size of the allen head cap screw at the bottom end of the forks(i think it's an allen head),I let a friend borrow my manual so I can't look it up right now.My bikes down @...

I just got a new set of rims for the max but now the rotor bolts are to long. Awhile back I put some chrome ones on it but don't remember what size they are.( and cant seem to find the stock ones to see if they were shorter) Not sure if they where longer than the stock ones or not. But they...

how many of you guys have had your company down size or lay off, i have always thought my company was recession proof, but in the last 2 weeks thay have unloaded over 200 temps, this is scary ****, we have kept this town alive for a long time. dave