wheels

Expensive but nice... http://japan.webike.es/categories/100000_120000_127000_127007_1090127007.html

Hi Chaps, have recently added some new bits to the bike, which means I have some of the original bits to sell. there's a pair of wheels and front disks, and a pair of front callipers and a lever, all still in one piece. Links here...

Well got these wheels today not sure what I am gonna do with them. I always loved the looks of the takin it to the 9's bike with spoke wheels but I just put the Dynamags on my bike so now Im torn what to do with these. Maybe I should just build a takin it to the 9's look alike.LOL

Hello and good morning people!! I'm looking at new rear wheels for better rubber purposes, as many have done, to rid me of the mid-corner wobble that I'm sure is going to land me in a ditch at some point!! I'm aware of the XJ900 diversion wheel and that it will bolt on with a spindle kit, but...

$5,540 for some DOT legal, carbon fiber, wheels with ceramic bearings (-$250 and .05 lbs for steel bearings). Front - 3.5x18 @ 8.2 lbs with the ceramic bearings Rear - 8x18 @ 16.9 lbs with ceramic bearings If you have a Busa, rims in their size are under 7lbs for the front and under 10lbs for...

Hi guys, new to the forum and to the Vmax, and sizing one up with a view to it being a project. I've moved from the country to the city and as such the twisties are going to be a rarety, so something that goes like stink in a straight line and looks brutal is the order of the day - hence the...

I am in the process of changing over to R1 yr 04 thru 06 rims on my max. I got a problem and need some ideas, the rear rim is sitting about 1/4 to 3/8 inch off center to right facing rear of bike. There is no spacers i can remove and looks like i will have to do some machining to the crusher...

I am thinking of sending my 85 rear wheel too Kosman too have it cut apart and made into a 18" wheel. I was just wondering if anyone has done this too a 85 rear wheel and if they are happy with the workmanship also I would like too see some pictures of the completed wheel any advice on this...

Planning to install a GSXR 750 rear wheel on my vmax here soon....Hopefully. The wheel will be setup with a rotor adapter to run a Vmax rotor on the suzuki wheel. I'm thinking that I would rather install a suzuki rotor, eliminate the adapter, and put a suzuki caliper and caliper bracket...

Hello everyone, I've owned by vmax for about a year now, which is about the same time as I've been on this forum. All this time looking for ideas and what other people have done to their bikes to improve them. What I found out is that the max needs major help in the handling department and one...

Extended swingarm 3" and braced (did all the fab myself); Morley's driveshaft extension; FJR 1300 rear wheel; R1 front wheel; streetfighter headlight; ninja windshield; maier chin spoiler, summit shift light; custom airbrush paint (me); Kerker slip ons; soon to have a Morley's 1327 w/ 12:1 comp...

Wondering if it at all possible to swap out a stock Gen 1 wheel to a Gen 2.

Hey all I'm wondering if anyone has ever powdercoated their wheels. What all is involved? I assume the front is relatively easy, but I you still need to remove the bearings and all the grease - anything else? What about the rear wheel? How difficult is it to disassemble it to have it...

i have tried to search but did not find what i was interested in, has anyone tried to put these wheels or wheel on the gen 1 ?

Anyone have pictures of a bike with 17" wheels and an extended swingarm?

I ran across this tonight and knew some of you would appreciate it if you havnt seen it. http://www.modifiedpowerwheels.com/forum/topic.asp?TOPIC_ID=17704&whichpage=1

Never knew this company made wheels for the vmax. Not cheap at over $2K! They offer a few different styles. Looks like only 17"x3.5 and 17"x5.5 sizes offered. http://www.extremedesign.it/pages/RUOTE/Ruote_PVM.htm

Anyone have any experience with Gale speed wheels? They look like a good light weight alternative to the now discontinued Carrozzeria wheels, although their only available in 17 in diameter. Hard Racing in N.C. is advertising them for $1829.00. Gale speed lists a specific part number for the Vmax.

I'm sure this question has been asked here many times and well answered... I just can't find it...:bang head: I have a 97 Max/Black wheels/I don't like the black. I put out a post looking to swap the black for the bright finish MANY have responded... I know or at least I think I read:ummm...

I was lookin up my bogus no helmet, no insurance ticket to be sure that the case was still dismissed.:biglaugh: I came across this, there are no higher fines listed: Fine, Wheels off ground - motorcycle: $1,166.00, first time, every time. Pinellas County, Florida.....:ummm: That's about 3...