'96 Stock Dyno

[richwrench]

Here's my dyno sheet & video clip (thanks Brett) from Captain Kyles dyno party this past Saturday. A lot of smoke on decel - valve seals perhaps? Sean Morley has already given me some tuning advise. Any thoughts are welcome...


http://www.youtube.com/watch?v=sQrb--vZWz0

 

[satariel666]

Id say it looks good. Bit too lean but, im not an guru tho.


It seems that the last pull was the best so then hotter then better.
Id say one size bigger MJ to try.

 

[Nobody]

Smoke is normal, don't worry about it.

It is carbon burning off the valves.

 

[SpecOps13]

Rich, 1 Jet size sounds good, should work about right for you. For mine I'm thinking of shimming the needle a little higher?

My 89 is way faster right now and it's not fully tuned.:ummm:

 

[one2dmax]

You'll probably need two jet sizes but the Pilot Jet 2 might actually help it pretty good too.

 

[richwrench]

Sean - I just pulled my PAJ2 - it's a 170. What size do you recommend I try to go richer, and do you sell them ?

 

[one2dmax]

Smaller. I do sell them but what do you have on hand or around your area that someone else may have.