Show us your gauge setup

[Thevmaxrider]

Post pics here of your aftermarket/custom gauge clusters and setups. Be interesting to see the variations out there and give folks ideas of what can be done.

I will post pics tonight or tomorrow of Toxic's custom setup from Cycle One Off.

 

[KJShover]

The graphic wrap is now gone, so the tank is back to it's factory '07 paint. but here are my gauges.

• Sunpro tach w/ shift light
• Digital speedo
• Autometer water temp
• Autometer oil pressure

 

[naughtyG]

Mine's gonna look WAY cool but it ain't made yet :confused2:

I wanna go with a 3-dials pod that looks properly balanced, still deciding if I want oil pressure or a clock in there..

 

[mymax04]

anyone have any new pics to add to this thread?

 

[Ost85vmax]

Here is my setup but its going to be changing.

 

[srk468]

Here is mine, wanna add a Koso cluster to clean things up eventually but ran short on $$ this year so it'll have to wait...

Sent from my ADR6425LVW using Tapatalk 2

 

[MaxMidnight]

 

[PATMAX]

Another thread from the dead. Here are some pics of what can be done. Not mine but these were sent to me. Personally I run a KOSOVO RXN1 mounted where the tach/temp was located. Less **** hanging out in the wind.

When in doubt...Gas it !!!

 

[MR_NST]

that does it im buying a koso....

peace,
evan...

 

[ZackDaniels]

Sexy stuff. What's the info on these? Did you fab the cover and the instrument cowl?

Another thread from the dead. Here are some pics of what can be done. Not mine but these were sent to me.

When in doubt...Gas it !!!

I dig this too, would go a long way in streamlining the look of the bike, but I don't especially like tank based instruments. Vision is partially obscured by the chinbar on my helmet for those, and I like it all right out in front. If I didn't have that minor annoyance I'd be looking at this setup instead. Very sharp.

 

[MaxMidnight]

Sexy stuff. What's the info on these? Did you fab the cover and the instrument cowl?

They are Drift Iridium gauges set into an aluminium mounting plate with a smoked perspex faceplate both machined by yours truly.
I also made the brackets to mount the faceplate.

 

[davesax36]

So does anyone have a vapor working with COPs? I'd really like to have speed/tach on the bars, but not sure I can get spousal approval for a Koso...

 

[MaxMidnight]

...but not sure I can get spousal approval for a Koso...

You must make it abundantly clear that a Koso is an essential safety related modification.
On that basis how could you be denied?

 

[davesax36]

That's a great angle. I used that for my undercut transmission, though. Not sure how many more "safety mods" I can get right now.

 

[KJShover]

That's a great angle. I used that for my undercut transmission, though. Not sure how many more "safety mods" I can get right now.

The undercut trans is because you don't want to hit a false neutral or worse mess up your trans while riding and cause a wreck and you to hurt yourself.

As for the koso, putting 90% of the instrumentation up top, will help you not only to see it, put in a mear nano-second of a glance have your attention back on the road. So you don't get hit by a cage and killed when you're looking at the normal instrumentation on the faux tank.

:clapping:unk:

 

[satariel666]

No ready yet but I hope soon to be unleashed

 

[[email protected]]

No ready yet but I hope soon to be unleashed

:worthy::worthy:

 

[davesax36]

The undercut trans is because you don't want to hit a false neutral or worse mess up your trans while riding and cause a wreck and you to hurt yourself.

As for the koso, putting 90% of the instrumentation up top, will help you not only to see it, put in a mear nano-second of a glance have your attention back on the road. So you don't get hit by a cage and killed when you're looking at the normal instrumentation on the faux tank.

:clapping:unk:

Hmmmm. I'll have to finish cleaning up the garage before I have her read this...

 

[Redbone]

Looks great Prze!:thumbs up::thumbs up:
I'm guessing the Koso gauges will be Speedometer and Tachometer?

 

[satariel666]

Sir yes sir

And the diodes around gear led display are for shift light
Signal lights like for oil, neutral and high beam are free of choice.